MiataRoadster Short Throw (MRSS)
#1
MiataRoadster Short Throw (MRSS)
MiataRoadster short shifter kits - MiataRoadster - High-performance customer service...and parts for Roadsters
Put one in my MSM and totally changed the feel and reduced throw by about 50%. IMO a must have for anyone who likes to drive their car even in the slightest of spirited manners because it just gets you so connected to the car
Put one in my MSM and totally changed the feel and reduced throw by about 50%. IMO a must have for anyone who likes to drive their car even in the slightest of spirited manners because it just gets you so connected to the car
#10
The bend is nice. The throw on the long / bent shifter rod is very close to the throw of the stock shifter but your hand is closer to the wheel.
On a side note, the fulcrum points are nearly identical on the early 99-00 6-speed miata transmission shifter as it is to a RX7 TII shifter.
I'll report back once I get everything bolted together. Still many months away.
On a side note, the fulcrum points are nearly identical on the early 99-00 6-speed miata transmission shifter as it is to a RX7 TII shifter.
I'll report back once I get everything bolted together. Still many months away.
#16
I have the tall angled shifter from MR and it is significantly more crisp than stock. Although, I prefer a lighter shift **** on it rather than a heavy one; I had a 400g **** at the end of my shifter and it felt a little too vague. Overall the MR shifter was a good purchase and I would say it's a large improvement over stock.