A friend has a 1.8 '97 with ABS and it has horrible brake problems.

Anything more than a gentle nudge on the brake pedal locks the rears violently.

I am told someone took the whole car apart for a complete paint job a while back and they were just not very good at putting it back together afterwards.
Reportedly, this brake problem started after the said paint job.

I really need some reference pics to compare the brake line connections.
Thank you.


Here are pics of my friend's ABS unit as well as master cylinder connections, please let me know if you see anything out of place:

 

Is that an NB ABS block? Here is a picture of my 96 for you.

 

My 92 is completely different, but they are hard lines. I feel like you'd have to be extra special to somehow mix them up.

 

The ports are labeled. In one of the pictures I can see "FL" Clean it up a little and see if you can read the rest and make sure they look right. It also looks more like an NB1 unit than the NA ones I have seen here, and if so, I think the rear in/out lines are reversed.