Wilwood Pedal Assemblies?
#1
Elite Member
Thread Starter
iTrader: (17)
Join Date: Apr 2009
Location: Atlanta, GA
Posts: 2,799
Total Cats: 1
Wilwood Pedal Assemblies?
Who has exsperiance with installing them and using them?
I know its pretty much a universal setup, its just a matter of piecing together the system. I have been checking out their site and the prices are not all that bad on some of the assemblies. This will pretty much do away with power brakes right? How would this perform being a powerless setup?
Im just looking at the brake and clutch pedal that will keep the master cylinders in the engine bay.
BTW this has nothing to do with a miata, I got something else in mind and its got me thinking about this. I just want some advice from the brake exsperts on here.
I know its pretty much a universal setup, its just a matter of piecing together the system. I have been checking out their site and the prices are not all that bad on some of the assemblies. This will pretty much do away with power brakes right? How would this perform being a powerless setup?
Im just looking at the brake and clutch pedal that will keep the master cylinders in the engine bay.
BTW this has nothing to do with a miata, I got something else in mind and its got me thinking about this. I just want some advice from the brake exsperts on here.
#3
Elite Member
Thread Starter
iTrader: (17)
Join Date: Apr 2009
Location: Atlanta, GA
Posts: 2,799
Total Cats: 1
im thinkseing avout replacing the vrake systiem in a olddere trucjk and gibve it a hydrolic clutch casue a trans with a hydrolic setup will be going itn it! sory im a lil intocxicated..
#13
No, not usually. Dual masters only a couple inches apart make boosters a little difficult. With proper sized masters a booster isn't really necessary anyway.
No, with properly sized masters you'll gain performance due to being able to properly set bias.
For the record I prefer Tilton pedal sets to Wilwood...
Originally Posted by WonTon
I didnt see boosters for sale on there site! Thats why im wondering if you lose any braking performance when getting rid of the booster to install a Wilwood set up.
For the record I prefer Tilton pedal sets to Wilwood...
#14
Elite Member
iTrader: (15)
Join Date: Dec 2007
Location: San Antonio, Texas
Posts: 4,847
Total Cats: 27
Well FWIW about a million years ago I developed the braking system for a Formula SAE car. We used the dual master Wilwood setup and it worked very well. No brake booster, but then again it was a very light car and had proportionately huge rotors.
I calculated out the braking torques at all of the wheels under threshold braking and resolved it back to driver foot pressure to make sure it was reasonable. Not too light, not too heavy. I think I used 40 lbs as the target foot pressure. You can do the same for whatever vehicle you have.
I calculated out the braking torques at all of the wheels under threshold braking and resolved it back to driver foot pressure to make sure it was reasonable. Not too light, not too heavy. I think I used 40 lbs as the target foot pressure. You can do the same for whatever vehicle you have.
Thread
Thread Starter
Forum
Replies
Last Post
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM
Rudes333
Miata parts for sale/trade
17
11-05-2015 01:16 PM