Question about 1.6 Diff Compatibility
#1
Junior Member
Thread Starter
iTrader: (3)
Join Date: Oct 2007
Location: Fremont, CA
Posts: 172
Total Cats: 0
Question about 1.6 Diff Compatibility
I remember reading somewhere that the stub stafts of the viscous diff are different from the open diff, but I'm not sure if anything else is different.
Will the viscious diff + Stub shafts bolt up to the axles and drive shaft from the open diff car?
Will the viscious diff + Stub shafts bolt up to the axles and drive shaft from the open diff car?
#2
Supporting Vendor
iTrader: (33)
Join Date: Jul 2006
Location: atlanta-ish
Posts: 12,659
Total Cats: 134
If memory serves, the open actually has 1 long and 1 short stub. The lsd has 2 medium length stubs. I never tried to mis-match, but I suspect that there is a reason why the stubs are all different lengths.
The axles themselves are all the same. The difference is in how far the stub goes into the pumpkin.
The axles themselves are all the same. The difference is in how far the stub goes into the pumpkin.
#3
Junior Member
Thread Starter
iTrader: (3)
Join Date: Oct 2007
Location: Fremont, CA
Posts: 172
Total Cats: 0
If memory serves, the open actually has 1 long and 1 short stub. The lsd has 2 medium length stubs. I never tried to mis-match, but I suspect that there is a reason why the stubs are all different lengths.
The axles themselves are all the same. The difference is in how far the stub goes into the pumpkin.
The axles themselves are all the same. The difference is in how far the stub goes into the pumpkin.
Do you remember if the driveshafts are the same too?
Thread
Thread Starter
Forum
Replies
Last Post
bigmackloud
Miata parts for sale/trade
19
01-08-2021 11:24 AM