Stupid big brakes. Wilwood Superlite option for Trackspeed 11.75" kit
#21
__________________
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
#25
pfc's pad shape for them is 7751
they come in 01,11,97,07,and 14 compounds.
they come in 01,11,97,07,and 14 compounds.
__________________
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
#28
Former Vendor
Thread Starter
iTrader: (31)
Join Date: Nov 2006
Location: Sunnyvale, CA
Posts: 15,442
Total Cats: 2,100
With Bridgestone making a 205/45R16 RE-71R, there's a pretty good case to be made for a high-horsepower dual duty car that runs these brakes, 16x8s on the street, and a 15x10 6UL with 245/40 RC-1s or Hoosiers on the track.
#31
Former Vendor
Thread Starter
iTrader: (31)
Join Date: Nov 2006
Location: Sunnyvale, CA
Posts: 15,442
Total Cats: 2,100
It's a small amount of material. There's casting flash on the caliper, you're just shaving it down flat. There is little/no casting flash on the spindle, so IMO it's best to remove it from the caliper side. I snapped a pic for the supplemental instructions but it's at the shop. Will post it tomorrow.
#33
Supporting Vendor
iTrader: (3)
Join Date: Jul 2006
Location: San Diego
Posts: 3,303
Total Cats: 1,216
Enkei RPF1 16x8 +38mm. Doesn't get much 'gooder than that. If Andrew has a template for this BBK I can check clearance.
#37
Former Vendor
Thread Starter
iTrader: (31)
Join Date: Nov 2006
Location: Sunnyvale, CA
Posts: 15,442
Total Cats: 2,100
It actually wouldn't surprise me if they did. Our kit puts the caliper fairly far inboard, and I know the factory 16s clear our V1 11.75" kit. Maybe Bryan (genesplicer) has a set?