All new 15x9 - 15x9.5 6UL
#1
All new 15x9 - 15x9.5 6UL
Now accepting pre-orders for the all new 15x9 - 15x9.5 6UL.
$60 discount for orders placed before March 31st
Clears our F88 11.75x1.25 BBK without spacers
+32 offset on 15x9 gives better shock tower clearance at full bump than our previous wheel
+32 offset on 15x9.5 give better fender clearance in NA rear than +27 or +29 fitments
Shipping July 2024. Visit the website for full specs and pricing.
https://www.949racing.com/product-ca...cing/wheel/15/
Bronze
Charcoal
Nickel
Beskar
$60 discount for orders placed before March 31st
- Tilt Cast
- Flow Formed
- Knurled beads
- reinforced "Anvil" read bead flange
- 550kg load rated
- Lifetime warranty
Clears our F88 11.75x1.25 BBK without spacers
+32 offset on 15x9 gives better shock tower clearance at full bump than our previous wheel
+32 offset on 15x9.5 give better fender clearance in NA rear than +27 or +29 fitments
Shipping July 2024. Visit the website for full specs and pricing.
https://www.949racing.com/product-ca...cing/wheel/15/
Bronze
Charcoal
Nickel
Beskar
__________________
Last edited by emilio700; 04-08-2024 at 08:43 PM.
#6
Bronze!
I gotta say, the bronze is growing on me. We have done three different bronzes over the years. The 17" 6ULR back in 2009 was a light sand color, matte. Not bad but a bit boring. G2-3 was darker and also matte. Kinda muddy. G4 was bright bronze and full gloss. Came out a bit too bright I think,
This bronze is satin, which is key. Lets it glow a bit without being too blingy. Just enough orange to bring the copper element out. I don't like bronzes that have no orange and are just dull gold.
Factoid: Bronze is an alloy of copper and tin, which is why it has that orange component.
So for this bronze I started with our bright G4 bronze, made it satin instead of gloss. Then added a teeny bit more orange and red to hint at the copper side. It might be too much copper for some people but I like it. The thought is that the color won't be too strong against red, black, green or white cars where it compliments the best. Time will tell.
I gotta say, the bronze is growing on me. We have done three different bronzes over the years. The 17" 6ULR back in 2009 was a light sand color, matte. Not bad but a bit boring. G2-3 was darker and also matte. Kinda muddy. G4 was bright bronze and full gloss. Came out a bit too bright I think,
This bronze is satin, which is key. Lets it glow a bit without being too blingy. Just enough orange to bring the copper element out. I don't like bronzes that have no orange and are just dull gold.
Factoid: Bronze is an alloy of copper and tin, which is why it has that orange component.
So for this bronze I started with our bright G4 bronze, made it satin instead of gloss. Then added a teeny bit more orange and red to hint at the copper side. It might be too much copper for some people but I like it. The thought is that the color won't be too strong against red, black, green or white cars where it compliments the best. Time will tell.
__________________
Last edited by emilio700; 03-07-2024 at 11:41 PM.
#8
Satin bronze looks rad. Interested to see what it looks like in person. The Advanti bronze was one of my lesser favorites as well. Similar to the first 6UL’s mentioned above. Just a handful of shades off from being grey. Get some brake dust on em and they look like gunmetal until you’re up close.
This might’ve been covered in another thread but what’s the latest on 15x10 4x100 6UL’s and will they be available in the same bronze?
This might’ve been covered in another thread but what’s the latest on 15x10 4x100 6UL’s and will they be available in the same bronze?
#9
Satin bronze looks rad. Interested to see what it looks like in person. The Advanti bronze was one of my lesser favorites as well. Similar to the first 6UL’s mentioned above. Just a handful of shades off from being grey. Get some brake dust on em and they look like gunmetal until you’re up close.
This might’ve been covered in another thread but what’s the latest on 15x10 4x100 6UL’s and will they be available in the same bronze?
This might’ve been covered in another thread but what’s the latest on 15x10 4x100 6UL’s and will they be available in the same bronze?
__________________
#11
More details I forgot to add to OP:
The 15x9 & 9.5 clear our F88 BX1175 without spacers. They should clear any other 11.75 x1.25 BBK without spacers as well.
The 15x9.5 is a +32. We saw that the +27 and +29 fitments out there are a little tight on the rear fender lips of the NA with 245's so we brought them in a bit. You can still use spacers to fine tune if need be.
The 15x9 & 9.5 clear our F88 BX1175 without spacers. They should clear any other 11.75 x1.25 BBK without spacers as well.
The 15x9.5 is a +32. We saw that the +27 and +29 fitments out there are a little tight on the rear fender lips of the NA with 245's so we brought them in a bit. You can still use spacers to fine tune if need be.
__________________
#12
pre-Ordered!
(was half-tempted to go with Beskar but fear they'd be too close to matching my Titanium paint since I like them to contrast)
Nickel 6ULs look "The Sex" on Titanium MX-5s:
I'd like to see Beskar on a Sunlight Silver car since, IMO, only silver wheels look good on Sunlight Silver (black makes the car look "heavy", Nickel looks ordinary, Bronze is all kinds of wrong, but Beskar MAY be "Just right!"
Emilio: Do you have 2x Beskar wheels and access to a Sunlight Silver car to show them on?
(was half-tempted to go with Beskar but fear they'd be too close to matching my Titanium paint since I like them to contrast)
Nickel 6ULs look "The Sex" on Titanium MX-5s:
I'd like to see Beskar on a Sunlight Silver car since, IMO, only silver wheels look good on Sunlight Silver (black makes the car look "heavy", Nickel looks ordinary, Bronze is all kinds of wrong, but Beskar MAY be "Just right!"
Emilio: Do you have 2x Beskar wheels and access to a Sunlight Silver car to show them on?
Last edited by Lokiel; 03-15-2024 at 05:39 AM.
#14
Oh man, Lokiel! Your pictures made my decision much more difficult. My MSM once had a set of 15x8 Nickel 6ULs for track use but the owner sold them locally just before I found the the listing (1800 miles away). I've been contemplating switching from the 16x7 Konig Feather rims that came on the car with RT615K+ (215/45), I need new tires in about 6 weeks before it comes out of winter storage. A set of 225 or 245 on Nickel 6ULs sure would look nice on my MSM (FM2 Garret upgrade, GT2560 running 16-18 psi on the built engine).
Another MSM wearing Nickel 6ULs (from the sales listing, 21k miles)
Another MSM wearing Nickel 6ULs (from the sales listing, 21k miles)