ROTA Wheel RKR 15x8 +0 - Wilwood Fitment?
#1
Junior Member
Thread Starter
Join Date: May 2011
Location: Charlottesville VA
Posts: 55
Total Cats: 1
ROTA Wheel RKR 15x8 +0 - Wilwood Fitment?
Posted this up on Miata.nap but haven't gotten any feedback.
Has anyone ever tried to mount these to an NA with a Wilwood BBK (goodwin 11")?15 x 8
ET 0 (4x100) 67.1 Centre Bore
The fenders are already rolled, liners gone, extended APR studs. The car is not stanced, xida race.
Prefer to not run much of a spacer if possible.
NOT MY CAR!
https://www.wheeltech360.com/ROTA-Wh...Hub_p_192.html
https://www.clubroadster.net/threads....48399/page-40
Has anyone ever tried to mount these to an NA with a Wilwood BBK (goodwin 11")?15 x 8
ET 0 (4x100) 67.1 Centre Bore
The fenders are already rolled, liners gone, extended APR studs. The car is not stanced, xida race.
Prefer to not run much of a spacer if possible.
NOT MY CAR!
https://www.wheeltech360.com/ROTA-Wh...Hub_p_192.html
https://www.clubroadster.net/threads....48399/page-40
Last edited by Andre94R; 09-06-2022 at 03:28 PM. Reason: Clarity and forgiveness
#3
Junior Member
Thread Starter
Join Date: May 2011
Location: Charlottesville VA
Posts: 55
Total Cats: 1
From Olivia from Rota Europe
Thank you for the response.
"From the research I have done unfortunately they won’t fit as the spokes are really flat on the back of that wheel and it will possibly catch.
What we advise is if you are willing to run spacers for a better fit possibly a 5mm or maybe 8mm will be needed to clear."
Just wanted to fill in the info I have. Just for clarity Dynalite 11" Version 3 BBK from goodwin. I figured the templates would be close enough to provide some clarity.
Thank you for the response.
"From the research I have done unfortunately they won’t fit as the spokes are really flat on the back of that wheel and it will possibly catch.
What we advise is if you are willing to run spacers for a better fit possibly a 5mm or maybe 8mm will be needed to clear."
Just wanted to fill in the info I have. Just for clarity Dynalite 11" Version 3 BBK from goodwin. I figured the templates would be close enough to provide some clarity.
Thread
Thread Starter
Forum
Replies
Last Post
Ryan_G
Miata parts for sale/trade
6
10-31-2021 12:31 PM
Rugged Badger Racing
Miata parts for sale/trade
0
06-09-2020 09:18 AM