WTB Cheap! NB2 Diff, shocks/springs, complete front brakes
All for a 2001 miata. Need functional parts, as cheap as possible to 84721, thank you.
Drivers side door card, black and tan interior with bose Drivers seat, tan interior Front and rear OEM sway bars with endlinks, mounts, and hardware |
If you wanna drive to Oregon we have an 60k NB rolling shell for cheap. Everything on it is absolutely gorgeous. I have never seen zinc coating on bolts in such perfect condition. NB front subframe and entire PS system, NA front knuckles, and complete rear suspension minus the RR knuckle. Ok so it's not really rolling, but it is available.
And by cheap I mean nearly free. |
I have a set of NB shocks sitting around. Dont know the exact mileage, but they are in good condition and did fine on the car when i bought it. PM me if you're interested.
|
Originally Posted by curly
(Post 1516531)
If you wanna drive to Oregon we have an 60k NB rolling shell for cheap. Everything on it is absolutely gorgeous. I have never seen zinc coating on bolts in such perfect condition. NB front subframe and entire PS system, NA front knuckles, and complete rear suspension minus the RR knuckle. Ok so it's not really rolling, but it is available.
And by cheap I mean nearly free. Thank you |
whole car $300. All 8 arms are present, working sport brakes, both subframes, subframe braces, wiring harnesses, and complete PS system. Not much else. Carpet, interior, dash, all gone.
To make it ROLL, it needs a RR knuckle, hub, wheel bearing. We have a spare we could include for a little extra, cause we gotta press in a wheel bearing and hub. To make it DRIVE, it needs the above, plus a diff, driveshaft, transmission, and engine. |
Originally Posted by curly
(Post 1516626)
whole car $300. All 8 arms are present, working sport brakes, both subframes, subframe braces, wiring harnesses, and complete PS system. Not much else. Carpet, interior, dash, all gone.
To make it ROLL, it needs a RR knuckle, hub, wheel bearing. We have a spare we could include for a little extra, cause we gotta press in a wheel bearing and hub. To make it DRIVE, it needs the above, plus a diff, driveshaft, transmission, and engine. Id be willing to pay for shipping if we could work something out. Thanks, btw |
I have a full set of arms listed in the for sale section. Open to offers. Shipping will probably be pretty costly to you, as I am in OH.
|
Still need everything listed, thanks
|
Sounds like a job for The Parts Group.
|
Originally Posted by concealer404
(Post 1517826)
Sounds like a job for The Parts Group.
|
So, you're looking for free stuff, delivered, then? Their prices are great.
|
I'm still trying to figure out if I have the time to drive to Oregon and buy that shell off Curly.
|
We just parted out an NA and an NB. The guy who took the NA is caging it and racing it in Lucky dog, and is interested in doing the same with the NB. So he’s in no rush, and it’s available to others in the mean time. As I told Ed, we have the one missing RR knuckle we need to throw a bearing/hub on and it’ll be a roller. Has my NA front knuckles and upper front arms with ARP studs, full PS system, and we could include the underchassis braces too. Damn, damn shame what happened to that car. Motorcycle took out the rear pretty bad, snapping the spare tire mount out of the trunk. The fronts not too bad, but a trailer hitch punched a square hole in the bodywork. Oregon is a mecca for amazing used cars. No rust (aside from coast) and no sun fading/damage. So I’ve seen a lot of good Miatas, but this one was so damn clean. Must have been fair weather only and garages. I kept all the bolts we removed cause the zinc coating is beyond factory perfect on it. |
pm'd on the chassis
|
A big thank you to jrmotorsports55 for all the control arms.
|
Originally Posted by thumpetto007
(Post 1518091)
A big thank you to jrmotorsports55 for all the control arms.
|
I'll have a set of MSM billies this weekend ready to go, but there's a 25% surcharge for Mt.net members with negative cats.
|
I have no leads on a diff pumpkin.
|
I have a blown 1.6 diff you can have for free if you want it
|
Sorry, I'm not sure how to write what I want without amphiboly. I need a complete, working diff, that fits NB2 axles and NB2 driveshaft. I'll be selling my 3.6 Giken setup as the pumpkin, and everything inside. I hope that is more clear.
Thanks for the response, though. |
All times are GMT -4. The time now is 03:41 AM. |
© 2024 MH Sub I, LLC dba Internet Brands