T2 flange
5-bolt out

Please
and
thanks!

 

$85+ shipping.

 

Cool, thanks for the reply.

Are you sure that is the T25 housing and not the T28? The Garrett turbine housing part numbers are nearly impossible to research (for me, would love help there). Pretty much every google hit is to a speculative forum thread. I have a T28 housing already.

It looks like the flange has been drilled for M10 studs, is this correct?

I think the T25 housing was only available on the GT2554R and the GT2560R. Did this housing come from one of those turbos?

Thanks again!

 

This was purchased long ago as a 2560R. I can take some measurements and get back to you.

 

right on! thanks a bunch!

 

The turbo was purchased from Zilva.com years ago. It did not come with the metal ID tag. It has been drilled for 10mm studs as well as a mild wastegate port.

I have tried some research on the number cast into the housing. 449010-1
The best I could do in a short search was a picture on ATPTurbo. Garrett GT2560R (aka GT28R) Ball Bearing Turbo : atpturbo.com
Top left picture, has the same number.

It measures out just like the spec sheet on Garrett.com.
[img]webkit-fake-url://6e28f426-20b2-4207-8772-c46c5c28872c/imagejpeg[/img]


It was the same turbo in this thread as well. https://www.miataturbo.net/diy-turbo...s-1-2-a-80020/

 

Cool, please quote shipping to 80516.

good eye on that atp page. I have been there countless times, never looked close enough to see the number in the picture.

the other link you posted doesn't work. Do you actually have a link with a dimensioned drawing?

 

Check this page.
Turbocharger Specs: March 2011

 

PM'd

 

Aquired!