WTB Wanted to buy ads. Designated trademarks and brands are the property of their respective owners. forum cannot be held responsible for the outcome of any transactions.

WTB: Open diff for NB

Thread Tools
 
Search this Thread
 
Old 06-20-2017, 08:00 AM
  #1  
Newb
Thread Starter
 
joekitch's Avatar
 
Join Date: Apr 2016
Location: Central Massachusetts
Posts: 30
Total Cats: 0
Default WTB: Open diff for NB

Edit: ended up buying ricethecliche's diff

The Tochigi-Fugi LSD in my 03 has been slowly but very loudly dying, likely the bearing for the pinion. These units are known to be problematic in general and not even that good as an LSD.

At the moment i'm just looking for an inexpensive replacement diff to get it back on the road and quiet it down, and an open diff is totally fine. My only criteria are thus;
-don't need the carrier, i can just bolt it up to the carrier i already have
-in decent condition
-preferably under 120k
-rust is alright but if there's too much it'll just be a pain to work with.
-needs to be from off a 1.8 manual
-needs to be one piece half shafts (slide-in, not bolt-in)

shoot me a PM
preferably around central MA, but i can pay shipping if you're willing to box it up and all that

Last edited by joekitch; 06-23-2017 at 10:01 PM.
joekitch is offline  
Old 06-20-2017, 01:36 PM
  #2  
Elite Member
iTrader: (2)
 
ridethecliche's Avatar
 
Join Date: Aug 2016
Location: New Fucking Jersey
Posts: 3,890
Total Cats: 143
Default

Originally Posted by joekitch
The Tochigi-Fugi LSD in my 03 has been slowly but very loudly dying, likely the bearing for the pinion. These units are known to be problematic in general and not even that good as an LSD.

At the moment i'm just looking for an inexpensive replacement diff to get it back on the road and quiet it down, and an open diff is totally fine. My only criteria are thus;
-don't need the carrier, i can just bolt it up to the carrier i already have
-in decent condition
-preferably under 120k
-rust is alright but if there's too much it'll just be a pain to work with.
-needs to be from off a 1.8 manual
-needs to be one piece half shafts (slide-in, not bolt-in)

shoot me a PM
preferably around central MA, but i can pay shipping if you're willing to box it up and all that
I'm in Worcester and I have what you're looking for.

Pm sent.
ridethecliche is offline  




All times are GMT -4. The time now is 06:18 PM.