gospeed81

iTrader: (51)

I am looking for "slightly used" 1.8L pads and rotors.

As I work tirelessly (reading forum) at my internship, I am realizing that my summer finances are not as good as planned. I pay my own tuition, so I save up during the summer, and am not on track this year.

I already have brackets and calipers, but in the time I have rounded up these parts my 1.6L brakes have gone to absolute crap...and there is no sense replacing them when I have the upgrade parts ready.

I know this is ridiculous, but I just can't swing the stainless lines, HPS pads, new NAPA rotors and all that I was originally planning on.

I may already have a line on OEM pads, but would pay a little for something more aggressive that could be trued and has some life in it.

I can also machine rotors if someone local has some they took off for an upgrade.

Thanks,

-Damon

hackerchris

iTrader: (13)

If you need a second set of front and rear 1.8 calipers and brackets I can sell them.

KMag

iTrader: (2)

I have a set of rear rotors, 9 7/8" dia. They are in good shape with a little surface rust that will clean up real easy. PM if you are interested.

KMag

Stein

iTrader: (46)

Shipping would be a bit high due to weight, but I have a set of 1.8 rotors that are yours if you pay shipping. I'm GUESSING $20 but can get a firm quote when I weigh them at work if you are interested. I don't recall condition. I have a couple of sets from partouts.

gospeed81

iTrader: (51)

kjr50 came through with the pads

Stein came through with rear rotors.

I am still looking for front rotors if anybody has them. Thanks.

deliverator

iTrader: (14)

I have fronts I took off the project car, but they are *ugly* rusty.

Can't imagine it'd be worth trying to clean them up, but if you want 'em I can drop them in a flat rate box; yours for shipping + insurance.

Considering fronts do most of your stopping, it might be worth it to get a good pair from NAPA for $50. Sell a pint or two of blood if you have to.

Stein

iTrader: (46)

I was going to suggest the same. I'll get your rears out Monday.

gospeed81

iTrader: (51)

Yeah, I talked it over with the wife...she said the same thing.

Will buy some nice new front disks that will last through a set of pads or two.

Thanks for the help (and advice) guys. I went from a $300 brake job to a very affordable $85 for serviceable breaks. This will include caliper rebuild kits.

I was mainly trying to round up as much hardware as possible since I have been turning rotors and rebuilding calipers for a decade and never had any problems. It's kind of cheesy...but when you've got more expensive things higher on the priority list you have to cut corners sometimes.

I am prepared to run straight to NAPA and buy new parts if I can't turn the rotors within specs, or the pads don't run true. If I wasn't prepared to do so I wouldn't have considered this an option. I only state this for newbs reading that think they should try to run used brake hardware on a turbocharged sports car. If you don't have experience (shop experience) rebuilding brake systems don't imagine for a second you can get away with this.


Thanks again guys. Will let you know how it goes.