Prepping for turbo build
#448
Elite Member
Thread Starter
iTrader: (5)
Join Date: Aug 2011
Location: South Jersey
Posts: 1,512
Total Cats: 30
I'm picking up a jug of Rotella today!
Is there anywhere cheaper to buy a long straight piece of silicone hose? Like this... $25 + Shipping is steep for a foot of silicone hose
Silicone Hose
I guess my only other solution would be to use a 6" aluminum pipe but I like the idea of using the silicone hose and cut it to the perfect length. It would also be flexible obviously which would help with the connection I need to make
Is there anywhere cheaper to buy a long straight piece of silicone hose? Like this... $25 + Shipping is steep for a foot of silicone hose
Silicone Hose
I guess my only other solution would be to use a 6" aluminum pipe but I like the idea of using the silicone hose and cut it to the perfect length. It would also be flexible obviously which would help with the connection I need to make
#450
Elite Member
Thread Starter
iTrader: (5)
Join Date: Aug 2011
Location: South Jersey
Posts: 1,512
Total Cats: 30
Appreciate the offer! I hope to have it finished up this coming weekend... I am just waiting on my COP's in the mail and I have a few other small things to finish up. If you have time this weekend I could use a hand! I will PM you my cell #
#451
I am working late Saturday and same Sunday. I can come by Friday night after work and give a hand, it's the only day I'm not tied up with anything and I should be done work by 4ish so to you by 5ish. LMK if you wanna do that and if you need any tools or anything.
I do NOT know how to wire in the COP setup
I do NOT know how to wire in the COP setup
#452
Elite Member
Thread Starter
iTrader: (5)
Join Date: Aug 2011
Location: South Jersey
Posts: 1,512
Total Cats: 30
I am working late Saturday and same Sunday. I can come by Friday night after work and give a hand, it's the only day I'm not tied up with anything and I should be done work by 4ish so to you by 5ish. LMK if you wanna do that and if you need any tools or anything.
I do NOT know how to wire in the COP setup
I do NOT know how to wire in the COP setup
I'm not sure how far I will get with it this weekend but if I need any help next week I will keep this thread updated lol
#453
Elite Member
Thread Starter
iTrader: (5)
Join Date: Aug 2011
Location: South Jersey
Posts: 1,512
Total Cats: 30
Having some exhaust fitment issues with my Artech exhaust :-/
Do you guys thing extended exhaust hangers will help drop the muffler enough to mate it up with the mid-pipe?
My other option would be to remove the mid-pipe exhaust hanger which gives me a lot more room to work with. If I do that though, I will have to cut off the OEM exhaust hanger rod that is welded to the frame, as it will make contact with the exhaust
Do you guys thing extended exhaust hangers will help drop the muffler enough to mate it up with the mid-pipe?
My other option would be to remove the mid-pipe exhaust hanger which gives me a lot more room to work with. If I do that though, I will have to cut off the OEM exhaust hanger rod that is welded to the frame, as it will make contact with the exhaust
#455
Elite Member
Thread Starter
iTrader: (5)
Join Date: Aug 2011
Location: South Jersey
Posts: 1,512
Total Cats: 30
something doesnt seem right there. You shouldnt have to do anything weird to make that fit. The mid pipe looks low. but if you brought it all the way up to the muffler height it might hit the axle, so the muffler might be a bit high too. This sounds like a job for contacting abe.
#460
Sorry for the delay, I found an extra ignitor and wired it up for batch operation. I left two strands connected if you ever decide to use sequential and want to shift wires later. If everything works out, just seal it up with quick epoxy. I left it open just in case. COPS should be plug and play now, just attach ground to the head (or extend from the ignitor). You'll see what I mean.