TurboTim's Dyno video...
11-24-2006, 11:22 AM
#1
Senior Member
Thread Starter
Join Date: Jan 2005
Posts: 737
Total Cats: 0
TurboTim's Dyno video...
Not sure if you guys have seen his dyno video...but if not here is the link.
http://www.youtube.com/watch?v=zu9NnVNKfyU
For those that dont know this setup runs twin GT15 turbos and a link ecu.
I have a couple questions for tim if hes up for it.
1. What gear did you dyno in?
2. How much power did it make?
3. How much boost was run?
If I ever get another miata I think I want to do this twin turbo kit on it. Something about having twin GT15 turbos seems cool to me. Sure its more work for the same result as a single turbo....but its cooler. It seems like this thing spools super fast in the video, and it sounds sick. Just wanted you guys to see it.
http://www.youtube.com/watch?v=zu9NnVNKfyU
For those that dont know this setup runs twin GT15 turbos and a link ecu.
I have a couple questions for tim if hes up for it.
1. What gear did you dyno in?
2. How much power did it make?
3. How much boost was run?
If I ever get another miata I think I want to do this twin turbo kit on it. Something about having twin GT15 turbos seems cool to me. Sure its more work for the same result as a single turbo....but its cooler. It seems like this thing spools super fast in the video, and it sounds sick. Just wanted you guys to see it.
Reply
0
0
11-24-2006, 01:13 PM
#5
Senior Member
Thread Starter
Join Date: Jan 2005
Posts: 737
Total Cats: 0
There is the dyno chart. I believe that was on 9-10psi or something along those lines. It may be "scenic" but its a lot more neat than a plain and simple GT2560R...its a very nice looking kit and it doesnt even appear cluttered like you would expect it to. I have always thought Tim's setup was super clean and very interesting.
Reply
0
0
11-24-2006, 01:38 PM
#10
Senior Member
Thread Starter
Join Date: Jan 2005
Posts: 737
Total Cats: 0
I think he was in 3rd gear, it seems like a 4th gear pull would have taken longer. But thats why I asked him what gear it was.
And just so you know most dynos are done in the gear thats closest to a 1:1 ratio and thats 4th on a miata. Some people dyno in 3rd so that the pull doesnt last as long but youll usually make more power in a 4th gear pull.
And just so you know most dynos are done in the gear thats closest to a 1:1 ratio and thats 4th on a miata. Some people dyno in 3rd so that the pull doesnt last as long but youll usually make more power in a 4th gear pull.
Reply
0
0
11-24-2006, 04:35 PM
#16
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,501
Total Cats: 4,079
oh yeah, i posted that on youtube and forgot to post the rest of the videos i wanted to. That pull was in 3rd, he did one in 4th and it took forever, 18sec and 121mph. (207hp / 191tq)
Reply
0
0
11-24-2006, 08:31 PM
#20
Elite Member
iTrader: (9)
Join Date: Jun 2006
Location: Chesterfield, NJ
Posts: 6,902
Total Cats: 399
Aww shucks. You guys make me smile!
That video is in 3rd gear. There is a higher-resolution version on the dyno-day link braineack posted. The dyno graph is above. it was at 10psi dropping to 9psi. I didn't realize it was only that psi, it runs 12-13 on the street. I think the compination of starting at 2000rpm, the quick spool of the turbos, and the slow acceleration of the dyno resulted in the wastegates opening differently????? I only realized the low PSI on the second to last run, and the manual boost controller was too hot to handle.
I did do a 4th gear run, same basic power numbers.
However I do not run a Link ECU, I run the AEM EMS. My Link ECU is FOR SALE HERE
It is a nice setup, but I want a lotta power like the ghettocharger and others (maybe a trade Andy?). Maybe I'll redo it next year, gut the A/C and P/S and put one huge snail under there. If I were to do TT again (anyone?? hehe) I would choose different turbos (bigger! Maybe two GT2554's??), now that I know it's possible to package it and it actually works decently. I didn't want to go crazy on expensive turbos just to find out the thing wouldn't spool!
The most difficult thing is getting stable boost control. Either they spool quick but lose boost after peaking, or slowly (relatively speaking...) spool and hold peak pressure.
That video is in 3rd gear. There is a higher-resolution version on the dyno-day link braineack posted. The dyno graph is above. it was at 10psi dropping to 9psi. I didn't realize it was only that psi, it runs 12-13 on the street. I think the compination of starting at 2000rpm, the quick spool of the turbos, and the slow acceleration of the dyno resulted in the wastegates opening differently????? I only realized the low PSI on the second to last run, and the manual boost controller was too hot to handle.
I did do a 4th gear run, same basic power numbers.
However I do not run a Link ECU, I run the AEM EMS. My Link ECU is FOR SALE HERE
It is a nice setup, but I want a lotta power like the ghettocharger and others (maybe a trade Andy?). Maybe I'll redo it next year, gut the A/C and P/S and put one huge snail under there. If I were to do TT again (anyone?? hehe) I would choose different turbos (bigger! Maybe two GT2554's??), now that I know it's possible to package it and it actually works decently. I didn't want to go crazy on expensive turbos just to find out the thing wouldn't spool!
The most difficult thing is getting stable boost control. Either they spool quick but lose boost after peaking, or slowly (relatively speaking...) spool and hold peak pressure.
Reply
0
0
