GT28R oil/water feed fittings
#1
GT28R oil/water feed fittings, other bolts ??
I've searched everywhere and just can't find any info on this.
I'm trying to build custom SS lines with AN fitting for oil and water supply for my turbo and can't find what fittings I need for the turbo. Anyone know what size/thread they are? It's a gt2560R turbo btw
edit:
Does anyone know what bolts are used for valve cover?
I'm trying to build custom SS lines with AN fitting for oil and water supply for my turbo and can't find what fittings I need for the turbo. Anyone know what size/thread they are? It's a gt2560R turbo btw
edit:
Does anyone know what bolts are used for valve cover?
Last edited by RusMan; 04-18-2007 at 12:25 AM.
#6
i bought a lot of the stuff from ATP turbo. the AN fittings from www.anplumbing.com i can't remember what the thread/pitch is, but i believe you can find it on m.n or by calling atp.
#7
banjo fitting
it's been a while, but i believe the oil is m12, the water m14. dont know the pitch.
the oil drain is an ATP two bolt. i used an 18" 10 an SS line from the drain to an NTP to AN adapter in the pan.
the othe water outlet was an m14 to 6an adapter, 6an swivel female to male.
it's best to sketch out a diagram of what you need so you don't order the wrong parts.
it's been a while, but i believe the oil is m12, the water m14. dont know the pitch.
the oil drain is an ATP two bolt. i used an 18" 10 an SS line from the drain to an NTP to AN adapter in the pan.
the othe water outlet was an m14 to 6an adapter, 6an swivel female to male.
it's best to sketch out a diagram of what you need so you don't order the wrong parts.
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM
JesseTheNoob
DIY Turbo Discussion
15
09-30-2015 02:44 PM