Micro-Mini Project
#3
Boost Czar
Thread Starter
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,729
Total Cats: 4,126
just cutting the ground from the solenoid, fails to wastegate. easy breezy. I dont run closed loop boost control and dont want to for dual maps. And considering my low boost setup would be 0%DC across the board....
#7
Boost Czar
Thread Starter
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,729
Total Cats: 4,126
When you spend the $11 for the mountable usb cable, and $1 at radioshack for the switch. Then you invest the 30 minutes to make it happen.
I also had to cut two USB cables to make a male/male to fit into the port and my laptop.
#11
Boost Czar
Thread Starter
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,729
Total Cats: 4,126
My MS is tucked away next to my stock ecu. I had a cable that would come out by the passenger seat to hook into. When the laptop is not in the car, I have to tuck it away, now I can simply plug it in there. No cables laying around when not in use.
#19
Boost Czar
Thread Starter
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,729
Total Cats: 4,126
yeah yeah. it's really just for rainy days and when my dad drives it. I can easily spool it to 10 pounds without trying at part throttle on the highway, and since my auto TB is still sitting on my dining table....
#20
Boost Czar
Thread Starter
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,729
Total Cats: 4,126
here Joe, this make you happy? Variable TPS ready to be installed this weekend, finally got around to it:
not before I port it slightly and shave the butterfly arm down of course.
not before I port it slightly and shave the butterfly arm down of course.