tap for oil pan - 1/2"x13npt ok?
#1
tap for oil pan - 1/2"x13npt ok?
most of the guides call for 1/2"x14npt, but it just so happens that my tap and die kit has a 1/2"x13npt tap. I am guessing that 14npt in this case means 14 threads per inch? If so, and taking into account that the oil pan is so thin there will only be a couple of threads, would I get away with the 13 npt tap and it would just be a little more snug of a fit?
#6
http://www.harborfreight.com/cpi/cta...emnumber=91395
not too expensive either.
#7
thanks guys - I am in sterling, va. (nova)
I am always up for ordering from harbor freight, since invariably more tools tag along for the ride. But I might check the hardware store first just to see what they want for the tap since I don't need the other stuff in the kit. Anyone know a good place to find the bit?
Oh and braineack, thanks for the tips on oil lines. I am ordering:
JGS td05 drain line kit, and for feed, am getting the following from Summit:
1x32.39 Hose, Braided Stainless Steel, -4 AN Female End, Red/-4 AN Female End, Red, 36 in.
1x11.99 Fitting, Adapter, AN Flare to Metric, -4 AN to 10mm x 1.5 Male
1x10.99 Fitting, Hose End, 90 Degree, -4 AN Hose to Female -4 AN
1x11.99 Fitting, Adapter, AN Flare to Metric, -4 AN to 10mm x 1.25 Male
I am always up for ordering from harbor freight, since invariably more tools tag along for the ride. But I might check the hardware store first just to see what they want for the tap since I don't need the other stuff in the kit. Anyone know a good place to find the bit?
Oh and braineack, thanks for the tips on oil lines. I am ordering:
JGS td05 drain line kit, and for feed, am getting the following from Summit:
1x32.39 Hose, Braided Stainless Steel, -4 AN Female End, Red/-4 AN Female End, Red, 36 in.
1x11.99 Fitting, Adapter, AN Flare to Metric, -4 AN to 10mm x 1.5 Male
1x10.99 Fitting, Hose End, 90 Degree, -4 AN Hose to Female -4 AN
1x11.99 Fitting, Adapter, AN Flare to Metric, -4 AN to 10mm x 1.25 Male
#8
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,501
Total Cats: 4,080
dude. then stop by my house saturday in CENTREVILLE and pick up the drill bit and tap you need. I'll be working on Newbsauce's ride installing a megasquirt and a bunch of other goodies....and you can point and laugh at mine.
#11
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,501
Total Cats: 4,080
rev2red = my vanity plate.
We'll probably be out early to avoid the heat, and work for a few hours.
By the time you come over my head will be removed....so it won't be very pleasant to look at :gay:
We'll probably be out early to avoid the heat, and work for a few hours.
By the time you come over my head will be removed....so it won't be very pleasant to look at :gay:
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM