Smallest Turbines?
#1
Smallest Turbines?
Hello Everyone, I am new here. I own a 99 base and Im thinking of going turbo... but not just turbo... SEQUENTIAL Turbo... so I was wondering if anyone has heard or seen any miata going this route? I checked on someone who had his white 92 hooked up with Gt15 but those were not sequential anyways let me know what sup... also does anyonw know where I can find the samllest turbo for my set up?
#4
Hello Everyone, I am new here. I own a 99 base and Im thinking of going turbo... but not just turbo... SEQUENTIAL Turbo... so I was wondering if anyone has heard or seen any miata going this route? I checked on someone who had his white 92 hooked up with Gt15 but those were not sequential anyways let me know what sup... also does anyonw know where I can find the samllest turbo for my set up?
Perhaps two of the K03 turbos off a VW/Audi 1.8... should start to spool just off idle and be at full whoosh by about 2500. Two of those running 10psi each would be fun.
#5
Senior Member
iTrader: (6)
Join Date: Mar 2005
Location: Sammamish, Washington
Posts: 1,396
Total Cats: 0
Good call. The K03 is as fast sooling as you can get while still moving some air. Hell.....People have even made 250 whp at 300 wtq on just one although I wouldn't recommend it. I am going to use one of those when I turbo our Xb next year. Should be a great match to the 1.5 liter.
#6
I totally dig the idea, I don't think it's been done before. But I have to ask, why? What research have you done that leads you to want to go that way? I'm truly curious.
Perhaps two of the K03 turbos off a VW/Audi 1.8... should start to spool just off idle and be at full whoosh by about 2500. Two of those running 10psi each would be fun.
Perhaps two of the K03 turbos off a VW/Audi 1.8... should start to spool just off idle and be at full whoosh by about 2500. Two of those running 10psi each would be fun.
#10
Damn, those are small... probably for a motorcycle.
Gator, I like your style. I look forward to watching this thing happen. Are you going to fab all the stuff yourself? Do you have a budget? What about a power goal? Even 2xK03's would probably push enough air for the 300HP club. If you're thinking one that small, and one even bigger, I hope you're smart on engine management. Also, nothing about the stock motor will handle that power for long... like minutes. If the idea is just to be unique, but leave the power at respectable levels, a couple of those motorcycle turbos would be the trick.
They're small enough that, they'd fit, the Manifold and DP's would be easier to fit, and you could probably get away with just basic engine management... a Link would be the most you'd need.
Gator, I like your style. I look forward to watching this thing happen. Are you going to fab all the stuff yourself? Do you have a budget? What about a power goal? Even 2xK03's would probably push enough air for the 300HP club. If you're thinking one that small, and one even bigger, I hope you're smart on engine management. Also, nothing about the stock motor will handle that power for long... like minutes. If the idea is just to be unique, but leave the power at respectable levels, a couple of those motorcycle turbos would be the trick.
They're small enough that, they'd fit, the Manifold and DP's would be easier to fit, and you could probably get away with just basic engine management... a Link would be the most you'd need.
#11
Yeah Im not going for crazy 300HP... I want 220 FLYWHEEL HP at MOST! I have about 2k saved... I know is not much but probably enough to buy either both turbos or the engine management. I will probably used pre fab stuff from the guy with the twin set up... https://www.miataturbo.net/forums/showthread.php?t=3721
I would proabably use the t12 and the t1544, I have to call Garrett and ask about their flywheel estimates and how they would work in a sequential turbo matter.
I would proabably use the t12 and the t1544, I have to call Garrett and ask about their flywheel estimates and how they would work in a sequential turbo matter.
#13
So you've got two turbos each capable of flowing ~130hp worth of air, for a total of 260hp, or almost as much as one GT2554R.
Each one will be spun by 900cc of exhaust gases vs. 1800cc pointed at a single turbine. So, they might spool marginally faster than a single, T25-sized turbo, but not by much would be my guess.
Each one will be spun by 900cc of exhaust gases vs. 1800cc pointed at a single turbine. So, they might spool marginally faster than a single, T25-sized turbo, but not by much would be my guess.
#14
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,493
Total Cats: 4,080
For 180rwhp and looking for something with instant spool I'd just look into a GT2554. You're looking at a lot of work for an easy power goal.
Look at the comparison of the GT2554, my T3 S60, and a Greddy turbo at 8-9psi:
both the gt2554 and t3 had boost control problems, but you get the idea.
Look at the comparison of the GT2554, my T3 S60, and a Greddy turbo at 8-9psi:
both the gt2554 and t3 had boost control problems, but you get the idea.
#15
Twin turbos on a 180k mile engine? Should be a blast.
The major reason for the k03 for me is that my 1.8T VW takes them also, that way I don't have to have a pile of different turbos laying around for when I blow them up. I can buy one spare, rebuild it and its good for both cars.
#16
Well, one K03 turbo might spool off idle (or thereabouts...actually, probably wouldn't start spoolling appreciably until ~2000 RPM, considering the K03 on my Jetta starts spooling ~1400 RPM, has 2000cc worth of air and 10.3:1 compression spinning it), but certainly not two of them.
I'm pretty sure one K03 (at least those in the current-gen VWs/Audis/Seats/etc.) flow enough air for ~220whp, so having two of them is probably way overkill and won't spool that quickly. If you're serious about twin-turbo'ing the Miata, you'd be best to stick with a smaller turbo.
I'm pretty sure one K03 (at least those in the current-gen VWs/Audis/Seats/etc.) flow enough air for ~220whp, so having two of them is probably way overkill and won't spool that quickly. If you're serious about twin-turbo'ing the Miata, you'd be best to stick with a smaller turbo.
#18
Well, the FD RX-7 used a sequential setup: one small turbo and one large turbo. The new BMW 335i uses twin parallel turbos that're the same size...300hp/300lb-ft...10.5:1 static compression...peak torque by 1400 RPM....max boost of 8.5psi. I guess that means that each turbo is only being asked to produce ~150hp of airflow @ 4.25psi
#19
I'm pretty sure one K03 (at least those in the current-gen VWs/Audis/Seats/etc.) flow enough air for ~220whp, so having two of them is probably way overkill and won't spool that quickly. If you're serious about twin-turbo'ing the Miata, you'd be best to stick with a smaller turbo.
So maybe it doesnt spool til 2600 or so, ok. There are plenty of Miatas running around that are just thinking of coming out of vaccuum at 2600rpm. If I wanted instant boost I'd get a Coldside PD blower.... Instead I want something that is neat and different (I'd be what, number three?) and that has turbo whine like no other. Which K03's whine pretty loud... especially with only an aircleaner on them.
How will it spool? IIRC the compressor maps for a stock k03 show two of them coming into boost around 2300-2500rpm. I'll have to check when I get home, but it wasnt any number that was absurd like some of the really large turbo miatas that don't come into boost til around 4000rpm.
How will it actually spool? Noone has done it yet, so that is yet to be seen.
I was always told if you are below 3krpm in a Miata except when stopping you are driving it wrong
And I'm talking a parallel setup, not sequential.
#20
just make sure you do lots of research and math and match your small and larger turbos properly... it would suck if your little turbo ran out of breath before the big one was ready to take over the show. You might also look into the sequential system used on the BMW 535D, it's a selective system that doesn't pass all of the air flow in the top end through the small turbo (read restriction). Impressive setup and has a seemless power band... most fun diesel I've ever played with.