keinayo

iTrader: (22)

I need a 90 degree sillicone elbow that connects the turbo inlet to the AFM. Something similar to the U- pipe from the greddy kit but only 90 degrees, since it is with a GT2554R turbo and the greddy u -pipe would not work. The air fliter will not fit if I use a u-pipe, and I can only squeeze it if I use a flexible 90 degree. elbow. Anyone had this issue before?

Braineack

iTrader: (62)

needs more visuals...

Joe Perez

iTrader: (8)

Places to buy silicone elbows:
http://www.atpturbo.com/Merchant2/me..._Code=SIL-90EL
eBay (search: silicone elbow)

You can get a discount on the ATP stuff through WideOpenTuning.

keinayo

iTrader: (22)

suppoe I will need an elbow, what size is the turbo inlet and what size is the AFM inlet (do not have them here, if I had could measure).

olderguy

iTrader: (19)

https://www.miataturbo.net/forums/sh...light=silicone

keinayo

iTrader: (22)

Ok, so I will need a 90 reducer elbow 2.75-2.25.

Mechazawa

I just bought some silicon couplers from these guys and found them to be of high quality. Price is right too.

http://www.siliconeintakes.com/index...70435ab01702ee