EMB Map help
#1
Senior Member
Thread Starter
Join Date: Apr 2011
Location: Martin, Slovakia
Posts: 507
Total Cats: 74
EMB Map help
Hi,
I am looking for base EMB autotune maps for my 1.8l 99AE.
I'm using a 3 bar V.W. map sensor and 315cc Toyota injectors, a td04-13t turbo with a 7psi waste gate actuator. My stock timing is 12 degrees, (2 degrees advanced by crank sensor mod) I have a wide band but I would prefer to use the stock lambda sensor for auto tune and the wide band for monitoring. I have stock coils/spark. The exhaust is 2.75 inch straight through with a removable cat. The auto tune circuit is activated by an adjustable map voltage comparator and is currently set to switch at 1.68 volts with a 0.1v decreasing dead band.
Any help would be much appreciated.
I am looking for base EMB autotune maps for my 1.8l 99AE.
I'm using a 3 bar V.W. map sensor and 315cc Toyota injectors, a td04-13t turbo with a 7psi waste gate actuator. My stock timing is 12 degrees, (2 degrees advanced by crank sensor mod) I have a wide band but I would prefer to use the stock lambda sensor for auto tune and the wide band for monitoring. I have stock coils/spark. The exhaust is 2.75 inch straight through with a removable cat. The auto tune circuit is activated by an adjustable map voltage comparator and is currently set to switch at 1.68 volts with a 0.1v decreasing dead band.
Any help would be much appreciated.
#2
Senior Member
Thread Starter
Join Date: Apr 2011
Location: Martin, Slovakia
Posts: 507
Total Cats: 74
No stress, I figured out what was needed. The timing map was 1 degree per psi. O2 Lambda mapped to TPS, TPS vs air flow for negative corrections and TPS vs additional injection for positive corrections.
I am surprised how well it works
I am surprised how well it works
Thread
Thread Starter
Forum
Replies
Last Post
Mikel
MEGAsquirt
4
09-28-2015 04:46 PM