Miatas For Sale

Welcome to Miataturbo.net   Members
Go Back   Miata Turbo Forum - Turbo Kitten is watching you test compression. > Performance & Tuning > ECUs and Tuning
Reload this Page 7MGE Supra injector + Stock ECU?
 
Register Forgot Password?

Welcome to Miata Turbo Forum - Turbo Kitten is watching you test compression.
Welcome to Miata Turbo Forum - Turbo Kitten is watching you test compression.


You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!

TRENDING PICTURES

Reply
 
 
 
 
LinkBack Thread Tools Search this Thread

Old 02-09-2010, 01:47 AM   #1
Default 7MGE Supra injector + Stock ECU?  
Junior Member
 
I am: oliver
Join Date: Dec 2006
Location: San Francisco, CA
Posts: 256
Feedback: 0 / 0%
Total Props: 0
I'm planning on rebuilding my miata slowly.
Can I install 7mge injectors and use the stock ecu during the break in period?
Going n/a for the first 1k miles or so.
Did a search and only found info regarding AFM but not MAF.
I have a 94 miata.
Not too familiar with the emanage and don't have the boomslang harness yet.

Thanks
Halcyon is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiTweet this Post!
Reply With Quote
Old 02-09-2010, 10:54 AM   #2
Default  
Ben
Supporting Vendor

 
Ben's Avatar
 
I am: Sir
Join Date: Jul 2006
Location: atlanta-ish
Posts: 11,823
Feedback: 31 / 97%
Total Props: 10
They're a little large for your needs, but should be ok.
Ben is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiTweet this Post!
Reply With Quote
Old 02-09-2010, 03:01 PM   #3
Default  
Junior Member
 
I am: oliver
Join Date: Dec 2006
Location: San Francisco, CA
Posts: 256
Feedback: 0 / 0%
Total Props: 0
Just getting it ready so I don't have to swap them again later. Eventually, I'll have 84mm pistons and a m45 @ 8psi.
Halcyon is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiTweet this Post!
Reply With Quote
Old 02-09-2010, 08:24 PM   #4
Default  
Senior Member
 
I am: Steve
Join Date: Jun 2007
Location: Shalimar, FL
Posts: 963
Feedback: 2 / 100%
Total Props: 7
The emanage will handle the size difference once you wire it in and set it up. That part is pretty straight forward. Those are 305s, right? If so, you'll be able to drive the car with them. You'll just be wasting gas under open loop conditions (like WOT). No big deal for 1K miles.
messiahx is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiTweet this Post!
Reply With Quote
Old 02-09-2010, 08:24 PM
 
 
 
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 

Advertising Information - miataturbo.net - Archive - Privacy Statement - Terms of Service - Top