need a picture of crank sensor quick!!
#3
Junior Member
Thread Starter
iTrader: (5)
Join Date: Jan 2009
Location: frederick MD
Posts: 341
Total Cats: -6
THANK YOU. i got it tho. so i replaced my crank sensor and now i get spark on all of them but my coil on 1&4 keeps getting hot. i can switch coils and it still does it. the coil pack on 2&3 stays ice cold.
STILL will not start. it all most wants too
PLEASE TELL ME WHY IT WOULD GET HOT ON 1&4?? ground? i was driving and it just stalled so it was not from me changing anything??
and as much as i mess with the crank gap it still fires good on 2&3 but it seems like it fires 1 time for every 2 rotations on 1&4 AND IT GETS HOT
STILL will not start. it all most wants too
PLEASE TELL ME WHY IT WOULD GET HOT ON 1&4?? ground? i was driving and it just stalled so it was not from me changing anything??
and as much as i mess with the crank gap it still fires good on 2&3 but it seems like it fires 1 time for every 2 rotations on 1&4 AND IT GETS HOT
Last edited by nickblackbelt; 08-20-2010 at 09:24 PM.
#4
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,052
Total Cats: 6,615
Seriously?
This is how the past week has been, from my point of view:
Nick: im not getting any spark on 1&4. ive swapped coils three times and it's always bad on 1&4
Everyone else: Probably your ****'s fucked up with the wiring or the ECU.
Nick: i think ill replace some random sensors cuz thatll fix it
Everyone else: No, there's some **** going down with the ECU or the wiring in the neighborhood of the ignition triggers, and you need to diagnose that.
Nick: i replaced the muffler and also the passenger's side mirror and my 1&4 plugs still aren't firing. i also installed a turbo but that didn't fix it either. i got a set of replacement floor mats on order tho, hopefully that will fix the problem??
Everyone else: Dude, are you even here right now? (raps on Nick's forehead like Biff from Back to the Future pt. 1) Find somebody who knows something about how a car works and ask them to look at your coil triggers.
Nick: WHY WON'T ANYBODY TELL ME EXACTLY HOW TO FIX THIS?
This is how the past week has been, from my point of view:
Nick: im not getting any spark on 1&4. ive swapped coils three times and it's always bad on 1&4
Everyone else: Probably your ****'s fucked up with the wiring or the ECU.
Nick: i think ill replace some random sensors cuz thatll fix it
Everyone else: No, there's some **** going down with the ECU or the wiring in the neighborhood of the ignition triggers, and you need to diagnose that.
Nick: i replaced the muffler and also the passenger's side mirror and my 1&4 plugs still aren't firing. i also installed a turbo but that didn't fix it either. i got a set of replacement floor mats on order tho, hopefully that will fix the problem??
Everyone else: Dude, are you even here right now? (raps on Nick's forehead like Biff from Back to the Future pt. 1) Find somebody who knows something about how a car works and ask them to look at your coil triggers.
Nick: WHY WON'T ANYBODY TELL ME EXACTLY HOW TO FIX THIS?
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM
Greasyman
General Miata Chat
2
09-28-2015 10:44 AM