Anyone block off the thermo valve on the plenum
#1
Anyone block off the thermo valve on the plenum
What exactly does this thing do? I have a spare manifold and I`m prepping it for my new block (extra nipples and drill and tapping PCV hole)
Since I`m doing a coolan re-route, can I just block this thermostatic valve off?
Also, on the IAC valve portion of the throttle body, does coolant flow through it as well?
Since I`m doing a coolan re-route, can I just block this thermostatic valve off?
Also, on the IAC valve portion of the throttle body, does coolant flow through it as well?
#5
I have my MS set to only use the IAC valve on warm up. My idle is set when warm only by the idle screw.
So when my car idles at 2k RPM for 2 mins after I start in the morning, that`s from that valve?
I already drilled and tapped the coolant hose output on the manifold, so when I put the freeze plug in the front it will all effectivley be blocked off?
So when my car idles at 2k RPM for 2 mins after I start in the morning, that`s from that valve?
I already drilled and tapped the coolant hose output on the manifold, so when I put the freeze plug in the front it will all effectivley be blocked off?
Thread
Thread Starter
Forum
Replies
Last Post
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM
JesseTheNoob
DIY Turbo Discussion
15
09-30-2015 02:44 PM