Injector vacuum leak?
#1
Elite Member
Thread Starter
iTrader: (1)
Join Date: Feb 2008
Location: Birmingham Alabama
Posts: 7,930
Total Cats: 45
Injector vacuum leak?
Would it be possible for an injector isolator to leak enough to cause a vacuum leak that would cause a slightly rough idle? Ever since I rebuilt my engine, I have had a steady but kind of rough idle. Makes stuff under the dash and in the engine bay buzz and rattle. I have also been able to smell a slight hint of raw fuel. No hoses leaking or anything I can tell. Its coming from under the hood so I thought maybe somehow the injectors are leaking? I can smell it most after the engine is hot and I shut it off. I haven't had to time to pull the fuel rail and check the isolators and o-rings. I have never been able to see any fuel puddling under the manifold, so if it is a leak its slow enough for it to evaporate. Should I look into this, or do you think I should look somewhere else? I can't think of anything else that would cause my idle to be rough other than a vacuum leak. I also think I feel a bit down on power. It feels like its really bogging down at anything under 4,000rpm. Oh, both isolators and o-rings are new as of when I rebuilt it under a year ago. Pretty sure it all got torqued down correctly, so I'm not too sure how it would be leaking. Though I have had bad luck in the past getting those little bastards to seal on RX7's. Pretty much the same isolators if not exactly the same. Sorry for the noobish question, I don't have much time these days and this has been bugging the **** out of me.
#3
Senior Member
iTrader: (4)
Join Date: Jan 2008
Location: Falls Church, VA
Posts: 1,361
Total Cats: 17
Fuel odor under the hood also has me thinking evap system. Check the lines to the canister (two on top and one on bottom) and the purge valve, and look over the canister for damage, cracks, etc.
A propane torch is also good for finding vacuum leaks. Obviously don't light it , just turn on the gas flow and run the tip over the areas you think might be leaking. When you're over the leak, the propane will get sucked in and your idle will change.
If you're going to spray brake cleaner around a running engine, make sure to use the non-flammable type. I think the non-chlorinated kind is highly flammable, and the chlorinated type is non-flammable. Read the can.
A propane torch is also good for finding vacuum leaks. Obviously don't light it , just turn on the gas flow and run the tip over the areas you think might be leaking. When you're over the leak, the propane will get sucked in and your idle will change.
If you're going to spray brake cleaner around a running engine, make sure to use the non-flammable type. I think the non-chlorinated kind is highly flammable, and the chlorinated type is non-flammable. Read the can.
#4
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,493
Total Cats: 4,080
no, use the highly-flammable stuff, im not kidding. The non-flammable stuff doesn't do anything. I've sprayed it straight into my BOV at idle and it doesn't even burp. The highly-flammable break cleaner makes the engine bog and is easier to detect with the slightest drop of it.
#8
Elite Member
Thread Starter
iTrader: (1)
Join Date: Feb 2008
Location: Birmingham Alabama
Posts: 7,930
Total Cats: 45
I will try it this weekend then. Thanks for the input. I also forgot to mention a drop in fuel economy. I probably only get an average around 20-22mpg right now. I should be getting at least upper 20's. My Evap system is modified. Canister is removed and I bypassed it with a hose or something, I forget exactly what I did, but either way its sealed and not leaking as far as I know.
PS, what about some ether, I have cans and cans of that stuff laying around. Seems like I recall its not good for the engine, but I'm sure in small quantities its OK. Heres to burning myself to death in a horrible accident when it backfires and lights me on fire!
PS, what about some ether, I have cans and cans of that stuff laying around. Seems like I recall its not good for the engine, but I'm sure in small quantities its OK. Heres to burning myself to death in a horrible accident when it backfires and lights me on fire!
#11
Senior Member
iTrader: (4)
Join Date: Jan 2008
Location: Falls Church, VA
Posts: 1,361
Total Cats: 17
I have cans and cans of that stuff laying around.
#12
Ues berkebile gum cutter, it works better than anything we've tried. Hell, it's what most NASCAR teams use to search for leaks as well as in a pinch prime the carbs...
Oh, and an injector that is not seated well or has a leak will cause all sorts of vacuum issues... Had this happen to me before.
Cheers,
Prospero
Oh, and an injector that is not seated well or has a leak will cause all sorts of vacuum issues... Had this happen to me before.
Cheers,
Prospero
#13
Elite Member
Thread Starter
iTrader: (1)
Join Date: Feb 2008
Location: Birmingham Alabama
Posts: 7,930
Total Cats: 45
I'd stick with brake cleaner or propane. Ether has been used as a starting fluid (might still be?) so I don't think it would cause any harm to the engine in the small amounts you'd be using.
Based on this wording, I would advise extreme caution. If you have a fresh can (<1 year) it's no big deal and you can handle it like any other flammable organic solvent. The problem is that in prolonged storage it eventually forms peroxides, an inevitable result of oxidation, and ether peroxides are EXPLOSIVE as opposed to merely flammable. The longer it's been sitting around, the greater the danger. Do you have any idea how old it is? If you see anything crusty or crystalline around the lids/caps that is bad ju-ju. Merely twisting open a bottle cap with peroxides gunked up in the threads can create enough friction to make it go boom. This has been a public service message from your friendly neighborhood scientist.
Based on this wording, I would advise extreme caution. If you have a fresh can (<1 year) it's no big deal and you can handle it like any other flammable organic solvent. The problem is that in prolonged storage it eventually forms peroxides, an inevitable result of oxidation, and ether peroxides are EXPLOSIVE as opposed to merely flammable. The longer it's been sitting around, the greater the danger. Do you have any idea how old it is? If you see anything crusty or crystalline around the lids/caps that is bad ju-ju. Merely twisting open a bottle cap with peroxides gunked up in the threads can create enough friction to make it go boom. This has been a public service message from your friendly neighborhood scientist.
I'll be sure to get it on video... though nothing will happen anyway. I just laughed at the thought of a huge fireball engulfing me and me running around screaming with my arms flapping around.
Thread
Thread Starter
Forum
Replies
Last Post