BMW Fanatic From VA Buys A Built Turbo NA
#67
Nice shop you get to work in, Broham.
Take your time, I get the feeling that this will work out. FWIW, I kinda liked starting with a built up unit. It becomes like a competition to see if you can work out a better solution than the p.o.
I would suggest you get to work right away on getting a computer to talk to the haltech. I would think any reputable tuner can at least get your tables to a safe zone and make sure your inj duty isn't maxed out.
You've probably already been here, but here's the link to the manual and haltech software: E6K Downloads - Haltech Engine Management Systems . MS-DOS based tuning ftmfw!
More: Windows Vista with haltech DOS software - RX7Club.com
Look into halwin for a possible replacement for the dos based tuning software.
Take your time, I get the feeling that this will work out. FWIW, I kinda liked starting with a built up unit. It becomes like a competition to see if you can work out a better solution than the p.o.
I would suggest you get to work right away on getting a computer to talk to the haltech. I would think any reputable tuner can at least get your tables to a safe zone and make sure your inj duty isn't maxed out.
You've probably already been here, but here's the link to the manual and haltech software: E6K Downloads - Haltech Engine Management Systems . MS-DOS based tuning ftmfw!
More: Windows Vista with haltech DOS software - RX7Club.com
Look into halwin for a possible replacement for the dos based tuning software.
#68
I think what the best solution to pass my parent's safety requirements is to sell the hardtop and use that money to get a fixed back. I need to find one that has the lowest mounts and will let me sit the lowest will the highest headrest. And then I need to possible find a new bar that is a little bit higher that has a harness bar. Suggestions?
#69
I'm a terrible person
iTrader: (19)
Join Date: Apr 2009
Location: Arizona
Posts: 7,174
Total Cats: 180
Don't feel like looking, what roll bar do you have?
HD has bolt-in harness bars.
How far does your head actually go above the bar? You are probably fine.
Sucks to sell the hard top but I guess if it is just a fun summer car it doesn't really matter.
HD has bolt-in harness bars.
How far does your head actually go above the bar? You are probably fine.
Sucks to sell the hard top but I guess if it is just a fun summer car it doesn't really matter.
#70
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,494
Total Cats: 4,080
correct, the miata CAS can only fit in one direction.
About safety: tell them to **** off, don't you have a hardtop? The car has nothing from the factory, and a roll bar that sits above your head will look stupid and not fit under the hard and/or soft top.
#71
Boss Frog SCCA legal hardtop bar. The top of my head lines up even with the bar or a 1/4 inch above it. The big problem is me hitting my head on it when im not wearing a helmet. Like when I sit in the car I can rest my head on the bar. I don't like my skull cracked. And my bar doesn't have a harness bar.
#73
A standard hard dog double diagonal hard core will: 1. have a harness bar 2. be the tallest bar that will fit under a SOFT TOP. I guarantee your head will still be at or above the bar with a stock seat, foamectomied or not, at your height. Ultrashield is a popular seat, get one of these or similar and bolt it to the floor, with a hard dog bar, and you will be as safe as possible for a Miata on the street. The nice closed cell foam covers for the hd bar will add some level of mind-comfort in case of cranium impact.
If you are thinking about the ultrashield seat, sit in one or measure your torso height for clearance of the harness holes. You can get the holes custom placed for your torso length, in case they don't fit you in their stock location.
If you are thinking about the ultrashield seat, sit in one or measure your torso height for clearance of the harness holes. You can get the holes custom placed for your torso length, in case they don't fit you in their stock location.
#78
Most of the roll bars are probably all within a inch or so in height. Unless you have something custom made. Then you'll run into issues with softtop and hardtop fitment.
Miata with hardtop > miata without hardtop.
Its safer, looks better, keeps the heat in and the rain out better, etc.
If your worried about hitting your head on the rollbar, just pad it up.
You can get in a wreck in any model car. The miata is maybe a tad more unsafe than most, but its not a death trap by any means. The car is built to avoid accidents, not get in them. Hell, I even avoided getting side swiped by some douche last night when I was out with the gf shopping. You just have to be aware. They are pretty small cars, so people have a hard time seeing us sometimes. lol
Miata with hardtop > miata without hardtop.
Its safer, looks better, keeps the heat in and the rain out better, etc.
If your worried about hitting your head on the rollbar, just pad it up.
You can get in a wreck in any model car. The miata is maybe a tad more unsafe than most, but its not a death trap by any means. The car is built to avoid accidents, not get in them. Hell, I even avoided getting side swiped by some douche last night when I was out with the gf shopping. You just have to be aware. They are pretty small cars, so people have a hard time seeing us sometimes. lol
#80
Alright so I know I am getting a fixed back and harnesses. That means I would need a harness bar. So I should probably just get a taller bar while I'm at it that has a harness bar. Basically I can't move this car till I make my head safe in it. And padding is not the proper solution. And I don't DD it and it's garaged so idk why I realy need a hardtop. Especially since I only am gonna be driving it on nice days