MS2 and internal vs. external ignitors
#1
Senior Member
Thread Starter
iTrader: (2)
Join Date: Oct 2007
Location: Northeastern CT
Posts: 547
Total Cats: 2
MS2 and internal vs. external ignitors
I'm switching from single coil to wasted spark (DSM coil packs) and I have become indecisive about how to drive the coils.
My current setup used the old VB921 internal ignitor, and a single MSD blaster II coil. Worked fine... never had any issues, at least none that I noticed.
The guy who is adding the second spark output for me (and some other functions) is recommending that I go with an external ignitor (like the stock DSM unit) instead of adding a second internal direct-fire ignitor. He is citing potential issues with additional heat and noise within the MS unit.
I know the later miata coils have built in ignitors, so most of you guys are probably using those... but does anyone have experience running wasted spark with internal ignitors? Any issues from noise or heat?
Thanks
My current setup used the old VB921 internal ignitor, and a single MSD blaster II coil. Worked fine... never had any issues, at least none that I noticed.
The guy who is adding the second spark output for me (and some other functions) is recommending that I go with an external ignitor (like the stock DSM unit) instead of adding a second internal direct-fire ignitor. He is citing potential issues with additional heat and noise within the MS unit.
I know the later miata coils have built in ignitors, so most of you guys are probably using those... but does anyone have experience running wasted spark with internal ignitors? Any issues from noise or heat?
Thanks
#4
Supporting Vendor
iTrader: (33)
Join Date: Jul 2006
Location: atlanta-ish
Posts: 12,659
Total Cats: 134
I'm switching from single coil to wasted spark (DSM coil packs) and I have become indecisive about how to drive the coils.
My current setup used the old VB921 internal ignitor, and a single MSD blaster II coil. Worked fine... never had any issues, at least none that I noticed.
The guy who is adding the second spark output for me (and some other functions) is recommending that I go with an external ignitor (like the stock DSM unit) instead of adding a second internal direct-fire ignitor. He is citing potential issues with additional heat and noise within the MS unit.
I know the later miata coils have built in ignitors, so most of you guys are probably using those... but does anyone have experience running wasted spark with internal ignitors? Any issues from noise or heat?
Thanks
My current setup used the old VB921 internal ignitor, and a single MSD blaster II coil. Worked fine... never had any issues, at least none that I noticed.
The guy who is adding the second spark output for me (and some other functions) is recommending that I go with an external ignitor (like the stock DSM unit) instead of adding a second internal direct-fire ignitor. He is citing potential issues with additional heat and noise within the MS unit.
I know the later miata coils have built in ignitors, so most of you guys are probably using those... but does anyone have experience running wasted spark with internal ignitors? Any issues from noise or heat?
Thanks
#5
Senior Member
Thread Starter
iTrader: (2)
Join Date: Oct 2007
Location: Northeastern CT
Posts: 547
Total Cats: 2
i think i'll likely stick with the BIP373 internals, or the stock DSM ignitor (it sort of comes along with the coil packs anyway, was just going to toss it). just need to make up my mind..
thanks for the offer though
thanks for the offer though
#8
The setup Scott did for me has given no issues at all running the MSD/Neon coilpack. I have about 1000 miles logged, pulls clean to 8000 rpm. I have been trying to make an MSD DIS2 work, and it does but it has issues. I dont recall the dwell setting, but I can get that if you need it.
HTH
Ron
Let me know if I can help out more
HTH
Ron
Let me know if I can help out more
#9
Senior Member
Thread Starter
iTrader: (2)
Join Date: Oct 2007
Location: Northeastern CT
Posts: 547
Total Cats: 2
thanks Ron. i kind of wanted to go with the internal ignitors like you have, but the majority of people i talked to reccomended going external. glad to hear its working fine fr you though
earlier i told the guy modding my MS to go ahead with the external setup. need to get the MS2 back and reinstalled asap, every day i dilly dally and dont have it is another day of nice weather lost!!
earlier i told the guy modding my MS to go ahead with the external setup. need to get the MS2 back and reinstalled asap, every day i dilly dally and dont have it is another day of nice weather lost!!
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM