Ok i guess i have an issue here
#1
Senior Member
Thread Starter
iTrader: (2)
Join Date: Feb 2006
Location: Mesa, AZ
Posts: 999
Total Cats: 0
Ok i guess i have an issue here
I used the diagrams that are shown on diyautotune's web site for configuring my board to work with the miata... http://diyautotune.com/tech_articles...azda_miata.htm
i hooked up the stim, and everything works but the RPM... (RPM was working off the stim before i did the outputs and these mods.)
SO i get to looking on here, and i see that Kags took a differant approch
https://www.miataturbo.net/forums/showthread.php?t=3061
So what diagram should i go by.. And should the RPM and the outputs work correctly on my Stim?
Here are some pics of my board..
i hooked up the stim, and everything works but the RPM... (RPM was working off the stim before i did the outputs and these mods.)
SO i get to looking on here, and i see that Kags took a differant approch
https://www.miataturbo.net/forums/showthread.php?t=3061
So what diagram should i go by.. And should the RPM and the outputs work correctly on my Stim?
Here are some pics of my board..
#11
I installed the vr circuit when i thought i had problems somewhere with rpm... no need to instal VR though. I'll have to look at mine, i don't remember if i did 65 or not.
I don't think i setup 65. I believe thats what our coils/driver are for. That circuit is for running the vb thingy off the board in q16.
I don't think i setup 65. I believe thats what our coils/driver are for. That circuit is for running the vb thingy off the board in q16.
#13
The DIYautotune board mods are different to my board mods (and kags as he copied my mods) as they are a 'development' of our work. I'm not sure exactly why they are a development as my board mods have been going strong for the last 13 months of daily driving, but I guess they you could modify your board either way and it should work without any problems.
#14
The RPM will NOT READ if you do the miata CAS/Coil mods and set the corresponding wheel decoder settings. To get it to work, go to "Spark"->"Stim for Wheel" and turn the Simulator On, be sure to turn it OFF BEFORE PUTTING THE MS IN YOUR CAR!!! All should be well, the sun won't burn out, and the world will still turn.
Thread
Thread Starter
Forum
Replies
Last Post
bigmackloud
Miata parts for sale/trade
19
01-08-2021 11:24 AM