Trouble going into CL-Idle
#1
Junior Member
Thread Starter
iTrader: (7)
Join Date: Mar 2012
Location: Gilbert, Az
Posts: 356
Total Cats: 31
Trouble going into CL-Idle
Hey guys,
intermittently once fully warmed up my MS2-Extra won't go into CL-Idle.
I've triple checked my settings for any criteria that might keep it from going into CL, but I can't seem to find anything (rpmDOT, TPS, close delay). It simply sits at 1500-1700 RPM, will go into CLIdle for maybe 1/2-1 second, the RPMs start to drop slightly, then it goes back out of CL and idle kicks back to 1500+.
Here's a quick log of the behavior along with my map, if anyone can see something I've got set incorrectly that would keep it from going into CL-Idle please let me know.
Thanks for any suggestions!
intermittently once fully warmed up my MS2-Extra won't go into CL-Idle.
I've triple checked my settings for any criteria that might keep it from going into CL, but I can't seem to find anything (rpmDOT, TPS, close delay). It simply sits at 1500-1700 RPM, will go into CLIdle for maybe 1/2-1 second, the RPMs start to drop slightly, then it goes back out of CL and idle kicks back to 1500+.
Here's a quick log of the behavior along with my map, if anyone can see something I've got set incorrectly that would keep it from going into CL-Idle please let me know.
Thanks for any suggestions!
#2
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,493
Total Cats: 4,080
what kPa do you idle at. I'm betting it's your 24kPs map decel value number. try bumping it to around 28-29. it's not getting surpassed therefore the MS doesn't think it should go back into idle.
#3
Junior Member
Thread Starter
iTrader: (7)
Join Date: Mar 2012
Location: Gilbert, Az
Posts: 356
Total Cats: 31
Initially it was set to 29. Generally it idles around 29-30 or so. I was under the impression CL would activate as long as it was ABOVE that value, so I lowered it to 24. Sometimes when PID would start to lower the idle decel load would drop to 25-26ish. It didn't seem to have any effect helping it get into CL being set at 24 though.
Thread
Thread Starter
Forum
Replies
Last Post