Spark Table
#1
Senior Member
Thread Starter
iTrader: (2)
Join Date: Jun 2012
Location: Texas
Posts: 1,153
Total Cats: 50
Spark Table
Could anyone provide some feedback on my spark table. I am thinking of adjusting it slightly on the new motor and havent been to the dyno yet. I need to get a set of det cans made first. Honestly I still think this is pretty conservative but I still like some feedback. Many Thanks
BEFORE
AFTER
BEFORE
AFTER
#3
Senior Member
Thread Starter
iTrader: (2)
Join Date: Jun 2012
Location: Texas
Posts: 1,153
Total Cats: 50
Of course its on a 2560r Toyota Cops 460cc rx7 inj and running 93 octane
EDIT
Im not familar with difference in winter/summer fuel. the low in my part of the state is around 40 through out winter. Its still in the 80s right now
EDIT
Im not familar with difference in winter/summer fuel. the low in my part of the state is around 40 through out winter. Its still in the 80s right now
#4
Elite Member
iTrader: (5)
Join Date: Oct 2011
Location: Detroit (the part with no rules or laws)
Posts: 5,677
Total Cats: 800
Yeah, i mean i guess it depends on your fuel.
I was at 15 - 16* and started getting some knock in boost due to shitty fuel. Backed it down to 12* and the knock pretty much went away.
I was at 15 - 16* and started getting some knock in boost due to shitty fuel. Backed it down to 12* and the knock pretty much went away.
Thread
Thread Starter
Forum
Replies
Last Post
Motorsport-Electronics
ECUs and Tuning
0
09-05-2015 08:02 AM