SamNavy getting out of the game
#1
Elite Member
Thread Starter
iTrader: (7)
Join Date: Apr 2006
Location: VaBch, VA
Posts: 6,451
Total Cats: 322
SamNavy getting out of the game
It's not all that bad... the wife just finally put her foot down. I've got 2 kids in diapers, so time to sack up and put the Miata on hold. Don't worry, the income from this sale will fund a Cobb Accessport and rear-differential brace for my MS6, so I'm keeping it real.
Rules: Paypal only. Shipping is included in all prices to the lower 48 via whatever method is cheapest at Postal Annex and will be in the mail in under 5 working days. Prices are set for now.
Brand new 26" 4-AN oil feed line with T-25 oil inlet adapter: SOLD
DSM BOV... can't remember if this is a 1G or 2G. I had flutter problems with it and do not think it's opening correctly, but also do not think it's broken... could have been operator error on my install or need the piston lubed or something. Attached is the welded T-fitting it came with a ghetto JBWeld T-fitting I made up: SOLD
Kia Watenecks: these are like $13 new at a dealership, so they're basically worth ****. I'll take $5 but you've gotta buy something else so I can throw them in the same box and don't eat it on shipping. SOLD
Advanced Autosport 4-line braided brake kit: SOLD
Boundary Engineering Billet Oil Pump Gears in original plastic: SOLD
The Original Gtech... I mean the first one, like Commodore64-Style: SOLD
949 Rods, still wrapped in plastic. SOLD
RX7 550's. The guy I bought these from told me they'd been cleaned and flowed but did not have the paperwork... I'm asking about halfway between a dirty set and a cleaned/flowed set because I just don't know... but I was going to drop these in and run them without hesitation: SOLD.
Protege Valve cover for 1.8 in great shape. Includes small PCV valve hose and sketch valve, plus plug-wire retainers. $45
ProComp 20psi boost gauge: $30 GAUGE POD SOLD ALREADY
Nordlock Washers. 8 still stuck together and 5 singles... enough to do your mani and DP. FM gets $2.75 a piece for these things. $10.
3" MAF/Filter adapter: $10
Brand new 3.636 R&P still in factory plastic and original box, and coated in assembly grease. $400
Rules: Paypal only. Shipping is included in all prices to the lower 48 via whatever method is cheapest at Postal Annex and will be in the mail in under 5 working days. Prices are set for now.
Brand new 26" 4-AN oil feed line with T-25 oil inlet adapter: SOLD
DSM BOV... can't remember if this is a 1G or 2G. I had flutter problems with it and do not think it's opening correctly, but also do not think it's broken... could have been operator error on my install or need the piston lubed or something. Attached is the welded T-fitting it came with a ghetto JBWeld T-fitting I made up: SOLD
Kia Watenecks: these are like $13 new at a dealership, so they're basically worth ****. I'll take $5 but you've gotta buy something else so I can throw them in the same box and don't eat it on shipping. SOLD
Advanced Autosport 4-line braided brake kit: SOLD
Boundary Engineering Billet Oil Pump Gears in original plastic: SOLD
The Original Gtech... I mean the first one, like Commodore64-Style: SOLD
949 Rods, still wrapped in plastic. SOLD
RX7 550's. The guy I bought these from told me they'd been cleaned and flowed but did not have the paperwork... I'm asking about halfway between a dirty set and a cleaned/flowed set because I just don't know... but I was going to drop these in and run them without hesitation: SOLD.
Protege Valve cover for 1.8 in great shape. Includes small PCV valve hose and sketch valve, plus plug-wire retainers. $45
ProComp 20psi boost gauge: $30 GAUGE POD SOLD ALREADY
Nordlock Washers. 8 still stuck together and 5 singles... enough to do your mani and DP. FM gets $2.75 a piece for these things. $10.
3" MAF/Filter adapter: $10
Brand new 3.636 R&P still in factory plastic and original box, and coated in assembly grease. $400
Last edited by samnavy; 04-28-2010 at 12:16 AM.
#7
Elite Member
Thread Starter
iTrader: (7)
Join Date: Apr 2006
Location: VaBch, VA
Posts: 6,451
Total Cats: 322
Brake and clutchlines will work on any year Miata 90-05, but brakelines are sold.
MSM Exhaust cam I believe is the same as for 99-00 BP4W heads. The MSM intake cam I know for sure has a smidge more opening and duration as per a detailed thread by Emilio over at m.net.
The Heliums are the universal standard:
Mazda Performance Parts: Konig Helium 15x6.5 Silver 40mm offset OUR MOST POPULAR MIATA WHEELS---SALE!
Goodwin gets $400 for these... and again, except for the miniscule bit of rash, they're perfect. The tires are completely shot, one has a nail in it and is flat. I have floorjacks and a pump... if you wanted to come over, mount them, and drive them home, I'm sure you'd make it... but 2 of them are a few atoms of rubber from showing cord.
MSM Exhaust cam I believe is the same as for 99-00 BP4W heads. The MSM intake cam I know for sure has a smidge more opening and duration as per a detailed thread by Emilio over at m.net.
The Heliums are the universal standard:
Mazda Performance Parts: Konig Helium 15x6.5 Silver 40mm offset OUR MOST POPULAR MIATA WHEELS---SALE!
Goodwin gets $400 for these... and again, except for the miniscule bit of rash, they're perfect. The tires are completely shot, one has a nail in it and is flat. I have floorjacks and a pump... if you wanted to come over, mount them, and drive them home, I'm sure you'd make it... but 2 of them are a few atoms of rubber from showing cord.
#8
BP5A-12-420 cam specs - MX-5 Miata Forum
I'll have to digest the info. The MSM cam has less duration but more lift than an 99 intake cam. I'll have to compare to my current cam timing with the 96 exhintake and adjustable gears on both.