BEGi seperated gas Downpipe, Wastegate opening enough?
#1
Elite Member
Thread Starter
iTrader: (1)
Join Date: May 2009
Location: Jacksonville, FL
Posts: 5,155
Total Cats: 406
BEGi seperated gas Downpipe, Wastegate opening enough?
So with my wategate actuator rod completely disconnected I am still building quite a bit of boost.
Earlier today I was able to brake boost it to like 8psi
So Corky was telling me how sometimes a spacer is needed on the DP flange because the wastegate is not able to open far enough, but by the looks of it my wategate is able to open pretty far.
Closed:
IMGP3491_sm.jpg
Opened:
IMGP3492_sm.jpg
Better view of it opened:
IMGP3493_sm.jpg
Does that look like is opened enough?
Earlier today I was able to brake boost it to like 8psi
So Corky was telling me how sometimes a spacer is needed on the DP flange because the wastegate is not able to open far enough, but by the looks of it my wategate is able to open pretty far.
Closed:
IMGP3491_sm.jpg
Opened:
IMGP3492_sm.jpg
Better view of it opened:
IMGP3493_sm.jpg
Does that look like is opened enough?
#5
Compared to the FM and BEGI turbo offerings of 8-12 years ago the manifolds and exhausts are so much more efficient that they will make boost with a very open wastegate.
As others said, porting the wastegate hole in the turbine housing will help - and so would a larger hotside a/r lol.
What's the rest of your setup? (Exhaust, cam timing etc)
As others said, porting the wastegate hole in the turbine housing will help - and so would a larger hotside a/r lol.
What's the rest of your setup? (Exhaust, cam timing etc)
#6
Elite Member
Thread Starter
iTrader: (1)
Join Date: May 2009
Location: Jacksonville, FL
Posts: 5,155
Total Cats: 406
Its a 99, stock long block, exhaust cam is retarded a tooth (happened when i saw spraying nitrous and i still havent fixed it, haha)
Its a BEGi Shanghai-S kit, non-intercooled. I have a racing beat race mid pipe and racing beat single tip muffler.
Its a BEGi Shanghai-S kit, non-intercooled. I have a racing beat race mid pipe and racing beat single tip muffler.
#8
Elite Member
Thread Starter
iTrader: (1)
Join Date: May 2009
Location: Jacksonville, FL
Posts: 5,155
Total Cats: 406
I can imagine that the increased overlap combined with my current pig rich AFR's would probably create a very hot and energetic condition within the exhaust manifold.
Im gonna get on fixing that first
#12
Senior Member
iTrader: (6)
Join Date: Aug 2008
Location: West Palm Beach, FL
Posts: 1,020
Total Cats: 1
yeah, the flapper door was banging the dp.
the flapper arm would open more with the DP off than it would on.
now i am having a problem like phils first problem where the flapper gets stuck, i need to put a C-clip on it like he did.
the flapper arm would open more with the DP off than it would on.
now i am having a problem like phils first problem where the flapper gets stuck, i need to put a C-clip on it like he did.
#13
I upgraded from an AVO setup to the BEGI separated setup with no other change and found a stronger topend and that the new setup would make 4-5 psi boost with the wastegate disconnected (it used to make 3 psi). Like the OP, the wastegate was free to open.
BTW to the OP, I should have said with an ADVANCED exhaust cam you will get much more energy in the exhaust. You probably have it backwards, your exahust is opening sooner.
#14
Elite Member
Thread Starter
iTrader: (1)
Join Date: May 2009
Location: Jacksonville, FL
Posts: 5,155
Total Cats: 406
Yah, I thought it was retarded but I may be wrong.
I wouldnt have any issue with 4-5 psi when the wastegate is completely opened, but currently with it completely disconnected It keeps on going up until I get detonation.
Im going to see if Corky will send me a spacer like what tyson has, if that doenst work Im converting it to an external dump (as in, the wastegate outlet doenst feed back into the dowpipe, it just dumps), and if that still doenst fix it Ill port the wastegate...
I wouldnt have any issue with 4-5 psi when the wastegate is completely opened, but currently with it completely disconnected It keeps on going up until I get detonation.
Im going to see if Corky will send me a spacer like what tyson has, if that doenst work Im converting it to an external dump (as in, the wastegate outlet doenst feed back into the dowpipe, it just dumps), and if that still doenst fix it Ill port the wastegate...
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM