Leafy

iTrader: (1)

I've done it with MMO before, its bright red, and at the time we had gallons of it.

hustler

iTrader: (6)

99 head is needed, but thanks.

I will just drop it with the machine shop since the #1 plug-hole is jacked.

k24madness

iTrader: (6)

My local head shop tested by putting vacuum to each port. No Charge.

hustler

iTrader: (6)

stock-valved 5a cam head is going to the machine shop for a physical. There will be cupping.

Braineack

iTrader: (62)

no spooning?

hustler

iTrader: (6)

We skip spooning and go straight to felching.

Oscar

iTrader: (2)

No bowel blending?

hustler

iTrader: (6)

dude, I still owe $2000 on the bad engine. After I pay that off I still have to come up with cash for this. Let's not also forget that the trans I bought for my daily is bad so I have to **** another $800 for a six-speed.

doward

So you have a head going to the shop and are "in progress"
OR
Do you need a known good 99 head?

Oscar

iTrader: (2)

Good lord, do I need to spell out everything for you? Given your history with ---- 'discomfort' and your shitty head... Nevermind

Get crunk on some Piraat, return the fuxored 2k motor and get a Corrado instead

hustler

iTrader: (6)

I dropped the head off today.

I have the good SS valved head in the garage but I'm saving that for a future engine that I can't afford right now. I am trying to put together a budget engine that gives me ~130whp and lasts for two years.

Miater

Gee whizz. Ive got half a mind to jump in on the tranny swapping and donate some head from my 99.

I just want to see what other things could happen the the poor Hus. Karma cloud is strong with this one.

hustler

iTrader: (6)

lol, this is pretty shitty. I did two swaps in two weeks; one car has a bad engine and the other has a bad trans. The car with the bad engine is in the garage, so the daily with the bad trans can't get a new trans until the track car is fixed. It never ******* ends...but it's always cheaper than financing a new car.

Twibs415

iTrader: (8)

my stock 94 1.8 at 170k with full rb exhaust, exhintake, intake and some careful adjsutments got me 132 whp on a spec miata dynojet. shouldn't be hard.

hustler

iTrader: (6)

No Mustang Dyno, no care.

Mobius

iTrader: (2)

Trey, do you know if the shop used a torque plate on the block?

Twibs415

iTrader: (8)

car made 122 on a MD without the header, test pipe and intake..... same max torque on both just more HP now

hustler

iTrader: (6)

So I can get a VVT engine that needs a rebuild for $400...I might just buy that.

shuiend

iTrader: (24)

Do it. VVT or bust.

shanem

iTrader: (1)

won't you just be back in the same boat needing a machine shop and such?