How to use a 5 speed shifter in a 6 speed
#1
Elite Member
Thread Starter
iTrader: (12)
Join Date: Jan 2007
Location: Hermosa Beach, CA
Posts: 2,573
Total Cats: 12
How to use a 5 speed shifter in a 6 speed
Its actually really easy!
Step 1: take 5 speed shifter and cut off the bottom pivot ball end. A lathe would be best, but a hacksaw/bandsaw plus a grinder works fine! (don't forget to remove the plastic housing on the pivot ball!)
Step 2: Shorten the end by 2/16-3/16
Step 3: Re weld the shifter together (don't forget to take out the delrin/plastic insert!
Step 4: Just use a socket extension (or similar) and a hammer to bang out one of the two pins in the 6 speed shifter housing.
Step 5: Go buy alcohol with the money you just saved
It works great. I never used a stock 6 speed shifter, but the throw should be similar.
Step 1: take 5 speed shifter and cut off the bottom pivot ball end. A lathe would be best, but a hacksaw/bandsaw plus a grinder works fine! (don't forget to remove the plastic housing on the pivot ball!)
Step 2: Shorten the end by 2/16-3/16
Step 3: Re weld the shifter together (don't forget to take out the delrin/plastic insert!
Step 4: Just use a socket extension (or similar) and a hammer to bang out one of the two pins in the 6 speed shifter housing.
Step 5: Go buy alcohol with the money you just saved
It works great. I never used a stock 6 speed shifter, but the throw should be similar.
#6
Elite Member
iTrader: (2)
Join Date: May 2007
Location: Cromwell, Connecticut
Posts: 2,605
Total Cats: 16
EDIT: Now that I think about it I think my 6 spd ended up coming with a shifter... scratch this post.
OK maybe I am retarded but why is any of this necessary. I am using the stock 5 spd shifter in my mazdaspeed 6 spd. This is all I did:
Ref:
https://www.miataturbo.net/general-miata-chat-9/msm-6-speed-47457/
OK maybe I am retarded but why is any of this necessary. I am using the stock 5 spd shifter in my mazdaspeed 6 spd. This is all I did:
https://www.miataturbo.net/general-miata-chat-9/msm-6-speed-47457/
#7
Elite Member
Thread Starter
iTrader: (12)
Join Date: Jan 2007
Location: Hermosa Beach, CA
Posts: 2,573
Total Cats: 12
EDIT: Now that I think about it I think my 6 spd ended up coming with a shifter... scratch this post.
OK maybe I am retarded but why is any of this necessary. I am using the stock 5 spd shifter in my mazdaspeed 6 spd. This is all I did:
Ref:
https://www.miataturbo.net/showthread.php?t=47457
OK maybe I am retarded but why is any of this necessary. I am using the stock 5 spd shifter in my mazdaspeed 6 spd. This is all I did:
Ref:
https://www.miataturbo.net/showthread.php?t=47457
Also, keep in mind I think the late 6 speeds have a difference size pivot hole, which nulls using a 5 speed shifter.
Thread
Thread Starter
Forum
Replies
Last Post
Greasyman
General Miata Chat
2
09-28-2015 10:44 AM