Differential Type ??
04-29-2013, 10:17 PM
#4
Well, I never actually ran it so I'm not sure how it acts. But just by turning it using my half shafts I can turn one side freely like open. I was told by another person torsen acts like open when it's not under load.
Also most of opens I have seen looks like this,
I will take some better pictures to night.
Also most of opens I have seen looks like this,
I will take some better pictures to night.
Reply
0
0
04-29-2013, 10:36 PM
#7
Newb
Join Date: Feb 2012
Location: Québec, Canada
Posts: 19
Total Cats: 0
Torsen Type 1 and Type 2 will behave like an open diff without load
Don't know if it's better or worst, I've never driven the fuji but since the fuji is a clutch type it will probably need maintenance. The Torsen, on the other side, will not. I don't know the bias differences...
Yes this is a Fuji
Don't know if it's better or worst, I've never driven the fuji but since the fuji is a clutch type it will probably need maintenance. The Torsen, on the other side, will not. I don't know the bias differences...
Yes this is a Fuji
Reply
0
0
04-30-2013, 08:14 AM
#9
So you're gonna sell a diff without confirming what it is and how many miles it has, just based only on what it looks like?
What if its not a Torsen 2? What if its high miles? Or abused? Looks like you got it at pick-n-pull because it still has the tag on it, and are trying to flip it for a profit. Is that the case?
Ugh
What if its not a Torsen 2? What if its high miles? Or abused? Looks like you got it at pick-n-pull because it still has the tag on it, and are trying to flip it for a profit. Is that the case?
Ugh
Reply
0
0
04-30-2013, 01:58 PM
#11
99-02 6spd had a Torsen and a 3.9 gear.
04-05 6spd were 4.1
5spd cars had 4.3 IIRC
The T-F diff is not a full clutch type. It has a clutch cone and some torque sensing character to it, I do not know all of the details on it. S2Ks use the same T-F diff IIRC. Some were known to fail, but the T-F being a bad design is way over blown.
I don't know what you have now, but if you have a 3.6 R&P, the T2 would work just fine on it. What are you looking for that you'd rather not take that diff apart?
04-05 6spd were 4.1
5spd cars had 4.3 IIRC
The T-F diff is not a full clutch type. It has a clutch cone and some torque sensing character to it, I do not know all of the details on it. S2Ks use the same T-F diff IIRC. Some were known to fail, but the T-F being a bad design is way over blown.
I don't know what you have now, but if you have a 3.6 R&P, the T2 would work just fine on it. What are you looking for that you'd rather not take that diff apart?
Reply
0
0
04-30-2013, 03:19 PM
#12
So you're gonna sell a diff without confirming what it is and how many miles it has, just based only on what it looks like?
What if its not a Torsen 2? What if its high miles? Or abused? Looks like you got it at pick-n-pull because it still has the tag on it, and are trying to flip it for a profit. Is that the case?
Ugh
What if its not a Torsen 2? What if its high miles? Or abused? Looks like you got it at pick-n-pull because it still has the tag on it, and are trying to flip it for a profit. Is that the case?
Ugh
Reply
0
0
04-30-2013, 03:20 PM
#13
99-02 6spd had a Torsen and a 3.9 gear.
04-05 6spd were 4.1
5spd cars had 4.3 IIRC
The T-F diff is not a full clutch type. It has a clutch cone and some torque sensing character to it, I do not know all of the details on it. S2Ks use the same T-F diff IIRC. Some were known to fail, but the T-F being a bad design is way over blown.
I don't know what you have now, but if you have a 3.6 R&P, the T2 would work just fine on it. What are you looking for that you'd rather not take that diff apart?
04-05 6spd were 4.1
5spd cars had 4.3 IIRC
The T-F diff is not a full clutch type. It has a clutch cone and some torque sensing character to it, I do not know all of the details on it. S2Ks use the same T-F diff IIRC. Some were known to fail, but the T-F being a bad design is way over blown.
I don't know what you have now, but if you have a 3.6 R&P, the T2 would work just fine on it. What are you looking for that you'd rather not take that diff apart?
Fae ran one for ages as well and the Ring & pinion broke before the diff.
If he didn't break it, it's bulletproof.
Reply
0
0
04-30-2013, 03:25 PM
#14
So you're gonna sell a diff without confirming what it is and how many miles it has, just based only on what it looks like?
What if its not a Torsen 2? What if its high miles? Or abused? Looks like you got it at pick-n-pull because it still has the tag on it, and are trying to flip it for a profit. Is that the case?
Ugh
What if its not a Torsen 2? What if its high miles? Or abused? Looks like you got it at pick-n-pull because it still has the tag on it, and are trying to flip it for a profit. Is that the case?
Ugh
I picked these up with the 6 speed swaps I got, one for my pitcrew and one for race project I'm building. I have an invoice showing the cars had 87K and 101K on them.I already picked up a 3.6 Gear setup from member here so no need to take a apart nice 3.9 setup and istall that specially since I'm using my 2 way. so don't just assume things sir. Thanks
Reply
0
0
04-30-2013, 03:33 PM
#15
Cool, Thanks.
I just wasn't sure what I got, and yard just says they are LSD and it's not like they open the diffs and see what's inside. They just go by the VIN number. I found out the hard way that I couldn't just install my 96 torsen in my 91 so I ended up getting complete package from them.
I have to take them apart and count the pinion to be sure if they are actually 3.9 or 4.3 since I only counted the ring and it's 43.
Reply
0
0
04-30-2013, 03:51 PM
#16
99-02 6spd had a Torsen and a 3.9 gear.
04-05 6spd were 4.1
5spd cars had 4.3 IIRC
The T-F diff is not a full clutch type. It has a clutch cone and some torque sensing character to it, I do not know all of the details on it. S2Ks use the same T-F diff IIRC. Some were known to fail, but the T-F being a bad design is way over blown.
I don't know what you have now, but if you have a 3.6 R&P, the T2 would work just fine on it. What are you looking for that you'd rather not take that diff apart?
04-05 6spd were 4.1
5spd cars had 4.3 IIRC
The T-F diff is not a full clutch type. It has a clutch cone and some torque sensing character to it, I do not know all of the details on it. S2Ks use the same T-F diff IIRC. Some were known to fail, but the T-F being a bad design is way over blown.
I don't know what you have now, but if you have a 3.6 R&P, the T2 would work just fine on it. What are you looking for that you'd rather not take that diff apart?
Reply
0
0
04-30-2013, 05:05 PM
#17
Former Vendor
iTrader: (31)
Join Date: Nov 2006
Location: Sunnyvale, CA
Posts: 15,442
Total Cats: 2,099
So you're gonna sell a diff without confirming what it is and how many miles it has, just based only on what it looks like?
What if its not a Torsen 2? What if its high miles? Or abused? Looks like you got it at pick-n-pull because it still has the tag on it, and are trying to flip it for a profit. Is that the case?
Ugh
What if its not a Torsen 2? What if its high miles? Or abused? Looks like you got it at pick-n-pull because it still has the tag on it, and are trying to flip it for a profit. Is that the case?
Ugh
Reply
0
0
05-01-2013, 08:36 AM
#19
I have no experience with the T-F really, only what I read about them. Maybe it was something about the early ones or something...maybe a servicing issue...I dunno. I just have the impression that the T-F wasn't as "desirable" as a TorSen. But I'm always up for learning new things.
Last edited by Doppelgänger; 05-01-2013 at 08:46 AM.
Reply
0
0
