emilio700

iTrader: (3)

Now taking orders for JDM spec Tein Mono Flex, 90-05 Miata. I'll be shipping these with standard rates of 10/7kg (560/392#). Custom rates optional, $80 per pair. First shipment arrives mid March to early April. Expedited service of $240 gets your kit here in about two weeks.

• Steel Construction
• Mono Tube internal construction
• Ride Height adjustable via threaded body and spring seats
• 16 way adjustable dampers, compression and rebound combined
• M.S.V. Technology for improved damping force adjustability
• Pillow ball upper mounts for increased steering feel
• EDFC (Electronic Damping Force Controller) compatible
• Anodized brackets with Teflon coated shock body for heavy duty rust prevention

krayzrac3r

not really looking to buy RIGHT NOW or anything but curious if you will get any spring rates similar to ground controls... like a 700/450

y8s

iTrader: (8)

emilio, in your estimation, do the mono with the MSV ride smoother or rougher than the equivalently sprung standard flex?

emilio700

iTrader: (3)

No direct experience myself, just conjecture. Ridden and driven Mono's in non-Miatas and they felt very good but that doesn't really offer any insight for our application. Based on my conversations with the engineer the Mono will have even less hysteresis at higher piston speeds than the Flex, and the Flex is already damn good in that respect. His opinion is that the comparison of performance with tiny piston displacements between a twin tube Flex and a Mono with MSV would give the nod to the Mono, because of the MSV. Now that is not specifically comfort but overall damper performance, which usually relates to comfort as well.

The way I see it, those tiny displacements are the weak point of any monotube when compared to a twin tube. I think the marketing emphasis on the DFV, MSV and similar technologies when marketing monotubes is sort of a byproduct of the engineers trying to get them to match the small displacement performance of the best twin tubes. Having done that we get the best of both worlds.

Damping rates wise, the Mono's are a bit firmer. I'll have some rough dyno comparsions tomorrow once I get the scales matched and all photoshopped together.

emilio700

iTrader: (3)

First set in, got here in 7 days with EMS. Looks just like the Flex except the Mon Flex are anodized instead of powdercoated. Same measurements as Flex.

The set shown has the standard 949Racing Mono Flex 10/7 springs.

teknikscian

iTrader: (3)

oh man! youre going to make me broke! MSPNP and monoflex! ill be dumping a lot of money on your doorstep shortly...

emilio700

iTrader: (3)

The USDM Mono Flex for the 90-05 Miata is finally here. I should have the first shipment here by March 12.

I had lobbied Tein to valve them firmer than the JDM Mono Flex I brought in last year and fit higher rate springs and they listened. The current spec is 10/8kg (560/448 in-lbs). I had the opportunity to test drive the USDM valve spec last year and can say they are at least as good a ride quality as the USDM Flex with even greater performance potential. It's possible to run hefty 12kg (680 in/lbs) springs up front without revalve on the Mono Flex.

Pricing, info and specs available on the website

JasonC SBB

Any full dyno plots?

emilio700

iTrader: (3)

No gots yet

Vashthestampede

iTrader: (17)

I want.....along with a set of 6ULs.