How to rewire adaptronic for a 1.6 to 1.8 swap?
#1
Junior Member
Thread Starter
iTrader: (2)
Join Date: Sep 2009
Location: singapore
Posts: 228
Total Cats: 2
How to rewire adaptronic for a 1.6 to 1.8 swap?
I was running adatronic plug and play for my 1.6 miata. I am currently doing a 1.8 swap. Since there is no more distributor in the 1.8 engine, how do I connect to the cas now? What do I do with this plug? I am guessing it's the cam angle sensor?
#2
Junior Member
Thread Starter
iTrader: (2)
Join Date: Sep 2009
Location: singapore
Posts: 228
Total Cats: 2
I ought to mention, i found this while searching through the forum.
-Hook the crank sensor signal wire into the OEM harness' Crank input (2E, White wire)
-Hook the cam sensor signal wire (from the valve cover sensor) into the OEM harness' Cam input (2G, Yellow/Blue wire)
Does anyone have the directions to the plug side? That is, how to tap the wires from the plug rather than from the ecu?
-Hook the crank sensor signal wire into the OEM harness' Crank input (2E, White wire)
-Hook the cam sensor signal wire (from the valve cover sensor) into the OEM harness' Cam input (2G, Yellow/Blue wire)
Does anyone have the directions to the plug side? That is, how to tap the wires from the plug rather than from the ecu?
Thread
Thread Starter
Forum
Replies
Last Post
JesseTheNoob
DIY Turbo Discussion
15
09-30-2015 02:44 PM