Information on MX5 NA 90-95 std connector to e420c loom?
08-18-2012, 10:37 PM
#1
Junior Member
Thread Starter
Join Date: Feb 2005
Posts: 65
Total Cats: 0
Information on MX5 NA 90-95 std connector to e420c loom?
Hey all,
I have recently purchased a 2nd hand e240c ecu with the MX5 NA 90-95 std connector to e420c loom. I plan to install this in my '94 1.8L MX-5. I did not receive any paperwork/manual for the ECU or loom. The ECU manual I have been able to find online, but have not been able to find any information on the connector loom, speciffically the jumper pins.
As I have a '94 model, I assume that the jumper pins should be set for 94/95?
Also, what is jumper J3 >m1d95 for?
Thanks
J.
I have recently purchased a 2nd hand e240c ecu with the MX5 NA 90-95 std connector to e420c loom. I plan to install this in my '94 1.8L MX-5. I did not receive any paperwork/manual for the ECU or loom. The ECU manual I have been able to find online, but have not been able to find any information on the connector loom, speciffically the jumper pins.
As I have a '94 model, I assume that the jumper pins should be set for 94/95?
Also, what is jumper J3 >m1d95 for?
Thanks
J.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
