inj batt offset for 1999 stock injectors
#1
inj batt offset for 1999 stock injectors
Anyone have the curve for this? There are no wizards for these injectors in the AEM list. The injectors are physically quite a bit different than the NA injectors, seems like they might have a different response. Is everybody just using the startup cals for a 1710 or 1720 and going with it, tweaking it if they observe a deficiency?
I'll also be looking for the curve for 550cc purple tops later.
I've searched mt.net, m.net and the google with no results.
I'll also be looking for the curve for 550cc purple tops later.
I've searched mt.net, m.net and the google with no results.
#3
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,493
Total Cats: 4,080
I tuned my Megasquirt's dwell/voltage correction table by hand. Luckily I had a alternator that was dying, so when i turned on things like the headlights and/or a/c the voltage would constantly linearly to time drop below 12v. I just kept adjusting the offset at various voltages until my AFRs stayed consistent.
Thread
Thread Starter
Forum
Replies
Last Post