93' Miata stolen and flipped build thread
08-19-2015, 01:15 PM
#4181
Elite Member
Join Date: Oct 2013
Location: Cedar City, UT
Posts: 2,764
Total Cats: 951
mind posting yours so I can play around with the lower kpa fields a little? I won't use it as copy/paste, just to experiment if messing with boost settings doesn't get my desired results.
Reply
0
0
08-19-2015, 01:54 PM
#4183
Elite Member
Join Date: Oct 2013
Location: Cedar City, UT
Posts: 2,764
Total Cats: 951
On another note, anyone else realize you end up making a shitload of brackets throughout the build of your car? I have made so many I've lost count.
Used the old AC condensor bracket and after a little drilling grinding, rivnuts, and some undercoating spray(vibrations) it's no longer zip-tied to the headlight motor.
Little farther away from the heat as well
Used the old AC condensor bracket and after a little drilling grinding, rivnuts, and some undercoating spray(vibrations) it's no longer zip-tied to the headlight motor.
Little farther away from the heat as well
Reply
0
0
08-19-2015, 02:12 PM
#4187
Elite Member
Join Date: Oct 2013
Location: Cedar City, UT
Posts: 2,764
Total Cats: 951
If I wasn't saving for a tow dolly, then I'd be buying a mig welder. Welding is one of the few skills(humor my subtle sarcasm) I haven't tried/invested in with this car build.
But yes Hornet, *pats you on the back* you still got them skills!
But yes Hornet, *pats you on the back* you still got them skills!
Reply
0
0
08-19-2015, 02:15 PM
#4190
Elite Member
Join Date: Oct 2013
Location: Cedar City, UT
Posts: 2,764
Total Cats: 951
The coffers ain't unlimited. I have no need for one at this point as well. It'd merely be hobby purchase at this point.
The whole fab/create stuff portion of the build is fairly well wrapped up(thank god).
The whole fab/create stuff portion of the build is fairly well wrapped up(thank god).
Reply
0
0
08-19-2015, 02:52 PM
#4192
Elite Member
iTrader: (3)
Join Date: Apr 2014
Location: Huntington, Indiana
Posts: 2,885
Total Cats: 616
Campbell Hausfeld® 115V MIG / Flux Core Wire Feed Welder - 167107, Welders & Accessories at Sportsman's Guide
I has this. Cheap, and you won't be able to penetrate really thick stuff, but it works just fine for 99% of the things I need it for.
I has this. Cheap, and you won't be able to penetrate really thick stuff, but it works just fine for 99% of the things I need it for.
Reply
0
0
08-19-2015, 02:53 PM
#4193
SADFab Destructive Testing Engineer
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
<p>TIG handles steel like a ******* boss. You see your sexy manifold? Thats TIG on steel.</p><p>Lets be real, if we talk jeff into buying a welder he will end up with some $10k miller.</p>
Reply
0
0
08-19-2015, 03:08 PM
#4194
If you want to TIG aluminum, make sure you buy an AC capable machine. If it is a DC only machine, you ain't gon weld no aluminum, ever (98% true).
It is possible to weld aluminum without AC, but the welds look awful and you need helium gas to make the arc super hot and the weld will be filthy dirty and fail.
Tig machines make really nice welds, but you have to make your material super clean, and it takes forever compared to a big wirefeed MIG.
It is possible to weld aluminum without AC, but the welds look awful and you need helium gas to make the arc super hot and the weld will be filthy dirty and fail.
Tig machines make really nice welds, but you have to make your material super clean, and it takes forever compared to a big wirefeed MIG.
Reply
0
0
08-19-2015, 03:15 PM
#4196
Elite Member
Join Date: Oct 2013
Location: Cedar City, UT
Posts: 2,764
Total Cats: 951
If you can tell, I'm slightly annoyed at all the **** that's broken in the past 8 months. That is probably mostly due to a lot of bakery repair bills on equipment this year as well though.
Reply
0
0
09-04-2015, 07:05 PM
#4198
Elite Member
Join Date: Oct 2013
Location: Cedar City, UT
Posts: 2,764
Total Cats: 951
Well I didn't get to play around with logging boost and timing as I hoped, work has been killing me.
I did manage to melt my speedo cable so I've got a new one coming in tomorrow so I'm not using GPS to hold my speed at 4100 RPM so I know I'm going 85mph...that gets old. This time a little aluminum tape wrapped around it to help reflect some of that manifold heat!
I did pick up a MBC to play with. After I play with it so I'm at 20psi I'll mess around with using it in conjunction with my EBC so the valve is 100% closed till 20 psi. Merely interested if it changes anything and these things are dirt cheap.
Mostly excited about this for my VW though. Eliminates the annoyance of your subframe shifting/creaking/going out of alignment by locking your bolts in a centralized location so they can't shift.
Stupid subframe design!
I did manage to melt my speedo cable so I've got a new one coming in tomorrow so I'm not using GPS to hold my speed at 4100 RPM so I know I'm going 85mph...that gets old. This time a little aluminum tape wrapped around it to help reflect some of that manifold heat!
I did pick up a MBC to play with. After I play with it so I'm at 20psi I'll mess around with using it in conjunction with my EBC so the valve is 100% closed till 20 psi. Merely interested if it changes anything and these things are dirt cheap.
Mostly excited about this for my VW though. Eliminates the annoyance of your subframe shifting/creaking/going out of alignment by locking your bolts in a centralized location so they can't shift.
Stupid subframe design!
Reply
0
0
