Originally Posted by 99mx5
(Post 830849)
Thanks for the feedback.
I'll definitely repack the front hubs again, I'll follow your advice on the grease. The bearing balls were the same size but the retainers were different. I went with Timken because they use the OEM NTK bearings like the factory. The seals were a little different, but the rest was the same. The wire wrap on the coil harness has been on for over 4 years and is still going strong. Weird, I melted that wire wrap quick, I suppose there are different types of plastic used for those. |
Originally Posted by 99mx5
(Post 830394)
I just ordered the Bat Inc fire sleeves and silicone tape
|
On second thought, disregard anything I typed because someone as slow as me has no business recommending anything or critiquing anyone.
|
I called them and asked them as Huslertron and Shoeiend did, they recommended same size to slip over straight fittings and one size up for applications with bent fittings.
XOXO to Trey and Lars |
Werd, thanks for the verification.
|
Originally Posted by 99mx5
(Post 831796)
I called them and asked them as Huslertron and Shoeiend did, they recommended same size to slip over straight fittings and one size up for applications with bent fittings.
XOXO to Trey and Lars Get some hose clamp-strap thingies too because the ones at Lowe's don't fit as snug as the ones Bat Inc sells. I also recommend sending them a Google Docs spreadsheet for orders rather than calling it out over the phone. https://docs.google.com/spreadsheet/...hl=en_US#gid=0 There's an example I made, which I made editable by anyone with a link. I locked it down here in case anyone gets crafty, but you can use the format if you want. |
4 Attachment(s)
My ARTech oil and coolant lines arrived today. The lines will be mounted with a bracket and bulkhead fittings.
|
Kitten crew, signing in.
|
10 Attachment(s)
I started taking the car apart to install the kit. I decided to snap some pics of the parts. I also cleaned and coated the manifold. I'll bake it tonight to cure it.
|
Why coat stainless? I recommend you get a new manifold/head gasket after you deck the manifold, after it warps from the first track outing.
This car is going to be awesomely fast. |
In, never noticed this thread Ari.
Great stuff, we shall skype again soon ;) |
Thanks, I hope it will be fast.
The manifold is mild steel. Only through the awesomeness of ARTech does it look that good when delivered.
Originally Posted by hustler
(Post 833509)
Why coat stainless? I recommend you get a new manifold/head gasket after you deck the manifold, after it warps from the first track outing.
This car is going to be awesomely fast. Yeah definitely. |
lol @ mild steel looking baller. I wish you could get gold coating so I could floss at cars & coffee.
|
I'll look for a gold/titanium VHT paint when I do mine.
|
I got the aluminum color. Some colors fade with use. I'm baking it now to cure it.
I also just received my FIC 650c and fire sleeves from BATinc. I'll post pics shortly. |
Looks awesome cant wait untill I can get my money to Abe so he can start yet another build in his busy schedule.
|
3 Attachment(s)
Here is the current state of the install. The turbo is mounted and plumbed for oil and coolant. The oil and coolant lines are SS braided teflon with BAT Inc fire sleeves and sealed with silicone tape at the ends. I made a bracket to hold the bulkhead fittings. I also made a support bracket to support the oil pressure sender and I made a heat shield for the AC compressor. I upload pics but need to get them off the camera.
Next steps are to install the exhaust, fuel injectors, intercooler, boost gauge and boost controller. |
20 Attachment(s)
Excuse the crappy pics, I just got this camera and am still getting used to it.
I used a ratchet, extension and socket to hold the tap straight while tapping the oil pan. When I drilled the hole, I used grease on the drill bit to catch the aluminum shavings. I cleaned and re-greased the bit often. I tapped the hole and put JB Weld on the threads of the fitting before screwing it in. I also made a support bracket for the oil pressure sender. When the engine rocks from hitting the rev-limiter, it will keep it from breaking the fitting on the block. I also made a bracket for the oil and coolant line bulkhead fittings. I covered all the lines with the BAT Inc fire sleeves. I also made a heat shield for the AC compressor. I mounted the intercooler. It also fits behind the stock bumper without cutting. I will duct it when its completed. |
Where is my back picture of the turbo with the downpipe attached? You promised me it the other night.
|
I thought I could install the DP from the bottom. I have to pull the manifold off again to install it from the top. So I decided to work on the intercooler mount before I install it. Sorry Lars.
|
All times are GMT -4. The time now is 03:26 AM. |
© 2024 MH Sub I, LLC dba Internet Brands