Miata Turbo Forum - Boost cars, acquire cats.

Miata Turbo Forum - Boost cars, acquire cats. (https://www.miataturbo.net/)
-   Build Threads (https://www.miataturbo.net/build-threads-57/)
-   -   Boosting on a Budget: Greddy Kit Done *Right* (https://www.miataturbo.net/build-threads-57/boosting-budget-greddy-kit-done-%2Aright%2A-85031/)

typicalsteve 07-07-2015 02:38 PM


Originally Posted by aidandj (Post 1247218)
Pretty sure it does include that. But in fancy orange, might match your shirt.

:yippee:

Brb buying

hi_im_sean 07-07-2015 02:44 PM


Originally Posted by typicalsteve (Post 1247222)
:yippee:

Brb buying

As far as I know, the 949 is extended length as well, but is straight at both ends.

typicalsteve 07-07-2015 02:57 PM


Originally Posted by hi_im_sean (Post 1247226)
As far as I know, the 949 is extended length as well, but is straight at both ends.

What is the benefit of the angle at the one end of the one you posted?

hi_im_sean 07-07-2015 03:47 PM


Originally Posted by typicalsteve (Post 1247228)
What is the benefit of the angle at the one end of the one you posted?

The line doesnt need to bend as much to make it up past the firewall. You can just see the 30 degree fitting attached to the slave in my pic that shows how it helps the routing.

Either line will work fine. You just need to decide if you want salmon, or angle.

typicalsteve 07-08-2015 02:13 AM

Sean, always go salmon. Always.

Aidan, just realized I'm subscribed to you on YouTube. Nice shifting noises on your last vid.

aidandj 07-08-2015 02:26 AM

Thanks. I'm real excited to get this thing back on the road.

typicalsteve 07-09-2015 02:24 PM

Sorry for the lack of updates- It's been way too busy around here lately.

I might be buying a '93 Mariner Blue with 34,000 original miles on Saturday, woo!
I finished up an entire LED conversion because LEDs are cool and I am procrastinating on my clutch install...
Speaking of which, my clutch kit and brake setup will most likely be on by the end of the weekend. Will post pictures and updates as I get some more work done.

Cheers!

aidandj 07-09-2015 02:28 PM

Make sure to get a rear main seal to replace it while the trans is out.
<br />
<br />Also don't forget to out a bit of loctite on the flywheel bolts so oil doesn't leak out.

typicalsteve 07-13-2015 09:08 PM

4 Attachment(s)
Ordered every single seal/gasket/cap replacement possible for when I do the clutch from Rosenthal. Yes, I still haven't done it.... Also pulled the trigger on the 949 HOK. ALSO got a brand new Mishimoto Z-Line intercooler for $50 so I couldn't really pass up that deal. :rofl: Now I need advice... Should I use the new Mishimoto over the used JDM Sport one I have? Pics below!

https://www.miataturbo.net/attachmen...ine=1436836100
JDM Sport IC has an extra row of fins

https://www.miataturbo.net/attachmen...ine=1436836100
JDM Sport core seems more dense... More fins is better, right?

https://www.miataturbo.net/attachmen...ine=1436836100
Mishimoto unit as a whole is heavier, though. Better quality unit?

https://www.miataturbo.net/attachmen...ine=1436836100
Mishimoto IC has a tad more depth than the JDM Sport one.

I like the Mishimoto one because it is brand new, doesn't have any bent fins, and is heavier. I like the JDM Sport one because the core looks a lot more dense... I'm at a loss.

WHICH ONE DO I USE?! :vash:

hi_im_sean 07-13-2015 09:14 PM

They are both terrible. Turbolators are shit, the JDM is the better of the 2 though.

typicalsteve 07-13-2015 09:17 PM

classic. Which one would you use out of the two?

hi_im_sean 07-13-2015 09:17 PM

For $11.39 more, you could have gotten something better than either of those.

27 25"x6 75"X2 5" Aluminum Chrome Fmic Bar Plate Front Mount Turbo Intercooler | eBay

Edit: I would use the JDM if i had to use one of those 2. It will have less pressure drop, and has marginally better turbolators, it will also be more favorable to routing the piping.

If it were me, those would both go up on craigslist, and id buy the one I have now or the slightly taller one i just linked above.

18psi 07-13-2015 09:18 PM

he's right. way better.
oh well

use the mishi
the other one is crap

hi_im_sean 07-13-2015 09:22 PM


Originally Posted by 18psi (Post 1248686)
he's right. way better.
oh well

use the mishi
the other one is crap


Lol, its great getting contradictory info isnt it? Vlad probably know better than me though so...

Although id like to hear why the mishi looks better?

hi_im_sean 07-13-2015 09:24 PM

1 Attachment(s)
Read padawan:

https://www.miataturbo.net/diy-turbo...tercool-83180/

This what youre looking for

https://www.miataturbo.net/attachmen...ine=1436837069

Or spend the $$ and get a precision or similar.

typicalsteve 07-13-2015 09:34 PM

Cool, thanks for the info as always guys! I'll be using the Mishi one for now because I'm a brand whore and it will probably perform better than the JDM Sport one. Maybe I'll get the better Ebay one that you linked to some day when I get bored again

hi_im_sean 07-13-2015 09:38 PM


Originally Posted by typicalsteve (Post 1248691)
Cool, thanks for the info as always guys! I'll be using the Mishi one for now because I'm a brand whore and it will probably perform better than the JDM Sport one. Maybe I'll get the better Ebay one that you linked to some day when I get bored again


See what you IATs are, and go from there. If they are acceptable, no need to change the intercooler. That mishi will certainly have less pressure drop than the one I linked though, so there's that.

typicalsteve 07-13-2015 09:41 PM


Originally Posted by hi_im_sean (Post 1248692)
See what you IATs are, and go from there. If they are acceptable, no need to change the intercooler. That mishi will certainly have less pressure drop than the one I linked though, so there's that.

Yeah I'll do a comparison post when I get the bolts so I can properly install it. I'd imagine I will have more heat transfer due to the decreased density in fin population but I will also have more flow and velocity. The JDM Sport one also has raised lips on the core which was probably blocking airflow as well. So I guess we'll see how the pros and cons of both weigh up in a real world application.

edit: Also hoping for better throttle response from the Mishi.

hi_im_sean 07-13-2015 09:48 PM


Originally Posted by typicalsteve (Post 1248693)
Also hoping for better throttle response from the Mishi.

lol, stop it with the conjecture.

18psi 07-13-2015 09:59 PM

the gaydeem sport will let your rad get more airflow
it will also flow less inside due to the tube/fin design
it's also a flimsy thing that you can likely bend with your bare hands
it will also likely deform over time
the mishi will be stronger and likely flow more inside

both are mediocre at best. The one sean linked in theory should be better than both, none of us really tested it though
I've had all 3 of these. I liked the one sean linked the most
LOL@ throttle response comment


All times are GMT -4. The time now is 01:15 AM.


© 2024 MH Sub I, LLC dba Internet Brands