|
Originally Posted by concealer404
(Post 1482255)
Well your TPS and Wideband don't work. And you didn't answer if the car was idling at 3600 or not, so that might be a problem. I'm not convinced i love the kpa values in that log at a steady 3600rpm either.
Basically what i'm saying is that this car is very far from being ready to be tuned. |
Ok so.... what were you doing during the log? I'm trying to paint a picture here so the log makes sense. You said it doesn't rev over 2k, then we have an 11 second long log of it holding 3600. Was this driving? Sitting in your driveway? What is the log of?
Help us help you. |
Originally Posted by concealer404
(Post 1482265)
Ok so.... what were you doing during the log? I'm trying to paint a picture here so the log makes sense. You said it doesn't rev over 2k, then we have an 11 second long log of it holding 3600. Was this driving? Sitting in your driveway? What is the log of?
Help us help you. |
Oh. That's a huge log. Gross.
Anyways, logging or tuning at this stage won't get you anywhere. Car has to work first. |
Gotcha, I'm still not sure how to get my car "working" if I don't tune it.
|
You have to fix the broken things. Then you tune it. You can't tune with broken things. You have broken things. Make them not broken. Then tune.
Trying super hard to be patient and helpful here. |
I understand, sorry. I'm still trying to figure out what's broken and what isn't. My tps should work fine since Lars included it brand new with the kit.
|
Originally Posted by LittleCarBigFun
(Post 1482309)
I understand, sorry. I'm still trying to figure out what's broken and what isn't. My tps should work fine since Lars included it brand new with the kit.
It might be working. Your ecu sure doesn't see it though. It needs to see it. Tuning will not fix it. |
Ok, I still have the old (not) tps, would it be better to plug that back in and run it on MAP?
|
I don't know what that means. Your car is running on speed density already as far as i can tell.
Do whatever you need to do to make the ecu see the TPS. |
JFC.
YOU NEED TO GET THE "NEW" VTPS INSTALLED AND WORKING BEFORE YOU DO ANYTHING ELSE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! dont even take a shit until that bitch is installed and working. |
Oh, this is a dumpster fire 1.6? That's right, i remember this from the Fuzzy Feel Reddit Bitchfest.
Did you like... change the wiring for the VTPS? Or did you just plug it in and expect it to work? |
I was honestly expecting it be plug and play. What do I need to wire for it to work?
|
Originally Posted by concealer404
(Post 1482315)
Oh, this is a dumpster fire 1.6? That's right, i remember this from the Fuzzy Feel Reddit Bitchfest.
Did you like... change the wiring for the VTPS? Or did you just plug it in and expect it to work? |
Originally Posted by LittleCarBigFun
(Post 1482316)
I was honestly expecting it be plug and play. What do I need to wire for it to work?
|
Tim you have a pnp. Therefor you will need to either:
A. depin the tps connector and swap 2 wires (search for what 2 youll need) B. depin the ecu header and swap 2 wires (search for the 2 youll need) |
Yep, just googled and found it. It's the red and black wires that need to be swapped around. Can they be pulled and re-inserted in the slots? And I also need a jumper for the prongs in the Megasquirt itself as well.
|
Originally Posted by LittleCarBigFun
(Post 1482321)
Yep, just googled and found it. It's the red and black wires that need to be swapped around. Can they be pulled and re-inserted in the slots? And I also need a jumper for the prongs in the Megasquirt itself as well.
verb
|
Originally Posted by LittleCarBigFun
(Post 1482321)
Yep, just googled and found it. It's the red and black wires that need to be swapped around. Can they be pulled and re-inserted in the slots? And I also need a jumper for the prongs in the Megasquirt itself as well.
https://cimg2.ibsrv.net/gimg/www.mia...faae150879.jpg |
TPS is fucked. I'm done with this, every single time I try something I fail. This project has been nothing failures and will continue to be so for me. $1k for the whole damn car with everything. Located in Crestview Florida. Maybe someone else can get it going and have fun with it
|
| All times are GMT -4. The time now is 07:35 PM. |
© 2024 MH Sub I, LLC dba Internet Brands