MiataGarage's Build Thread
06-24-2015, 10:08 AM
#41
Junior Member
Thread Starter
Join Date: Jan 2015
Location: Germany
Posts: 69
Total Cats: 2
New Front Bumper :
"New" Sparco Indy Seats :
Both Parts are very rare at least in Germany......
The Front Bumper (abs) is from a german brand called "Zender"
But i'm not sure if i should run this one or oem Bumper with Gv Lip?!
If i go with the Zender i go for a real custom Splitter and built a brake cooling system
The Sparco Indys are Rally Dakar Parts from 1996 ,they're the only Sparco's wich are adjustable till today (I need 15° for Tüv )
"New" Sparco Indy Seats :
Both Parts are very rare at least in Germany......
The Front Bumper (abs) is from a german brand called "Zender"
But i'm not sure if i should run this one or oem Bumper with Gv Lip?!
If i go with the Zender i go for a real custom Splitter and built a brake cooling system
The Sparco Indys are Rally Dakar Parts from 1996 ,they're the only Sparco's wich are adjustable till today (I need 15° for Tüv )
Last edited by MiataGarage; 06-24-2015 at 10:28 AM.
Reply
0
0
08-27-2015, 11:07 AM
#43
Junior Member
Thread Starter
Join Date: Jan 2015
Location: Germany
Posts: 69
Total Cats: 2
Little Update:
A new Cage is in Planing
I've bought a used Ms2 and new 1000cc Bosch Injectors
I go for uniball joints in the whole suspension
Building a sample of Paper for the new "Windscreen"
It will be made of Makralon :
A new Cage is in Planing
I've bought a used Ms2 and new 1000cc Bosch Injectors
I go for uniball joints in the whole suspension
Building a sample of Paper for the new "Windscreen"
It will be made of Makralon :
Last edited by MiataGarage; 08-27-2015 at 12:17 PM.
Reply
0
0
09-04-2015, 10:30 AM
#45
Junior Member
Thread Starter
Join Date: Jan 2015
Location: Germany
Posts: 69
Total Cats: 2
The Miata get's some Alfa 166 Brembo 4 Pot Front Brake Calipers
This is a cheap Solution for all who want real Big Brake
Disc's are 310mm so you need at least 16" Wheels
Disc's and Pads are cheap and you have Brembo quality Stuff
I paid around 120$ for a Pair
This is a cheap Solution for all who want real Big Brake
Disc's are 310mm so you need at least 16" Wheels
Disc's and Pads are cheap and you have Brembo quality Stuff
I paid around 120$ for a Pair
Reply
0
0
10-31-2015, 01:03 PM
#48
Junior Member
Thread Starter
Join Date: Jan 2015
Location: Germany
Posts: 69
Total Cats: 2
I fitted another 1.8 Harness
When Fm says : "You have a complete donor car, so you can just use the 1.8 ECU and wiring, right? Nope. Sure,
it’s possible, but it’s going to make your life dramatically more complicated for little, if any, benefit. "
" If you call us to ask if it’s really
that bad, we’ll tell you it is"
Simply trust them
I changed everything twice and 3 times and got no spark
The Harness came from a Car which was running before
I have no idea where the fault was.
Now everything works
I welded some Points on the Undertray and clear of the Rust
Engine and Subframes went in :
When Fm says : "You have a complete donor car, so you can just use the 1.8 ECU and wiring, right? Nope. Sure,
it’s possible, but it’s going to make your life dramatically more complicated for little, if any, benefit. "
" If you call us to ask if it’s really
that bad, we’ll tell you it is"
Simply trust them
I changed everything twice and 3 times and got no spark
The Harness came from a Car which was running before
I have no idea where the fault was.
Now everything works
I welded some Points on the Undertray and clear of the Rust
Engine and Subframes went in :
Last edited by MiataGarage; 10-31-2015 at 01:51 PM.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM
