Mobius Build 3.0: we begin with the garage
#88
Elite Member
Thread Starter
iTrader: (2)
Join Date: May 2008
Location: Portland, Oregon
Posts: 3,468
Total Cats: 365
^ that. Vented hood isn't painted yet.
Some pics and stuff. Track day Thursday at PIR.
tailpipe sensor reads about .5 leaner than the onboard. Not running 12 afr. Sadly no boost plot.
All miatas need at least 3 batteries
225 RS4/s on Konig Dekagrams. Haven't hooked up the brake ducting hoses yet, Thursday is a shakedown / have fun day with the car, monitor coolant & oil temps, etc but I'll probably get that done tomorrow. Finally having consecutive days of dry weather here.
Some pics and stuff. Track day Thursday at PIR.
tailpipe sensor reads about .5 leaner than the onboard. Not running 12 afr. Sadly no boost plot.
All miatas need at least 3 batteries
225 RS4/s on Konig Dekagrams. Haven't hooked up the brake ducting hoses yet, Thursday is a shakedown / have fun day with the car, monitor coolant & oil temps, etc but I'll probably get that done tomorrow. Finally having consecutive days of dry weather here.
#89
Elite Member
Thread Starter
iTrader: (2)
Join Date: May 2008
Location: Portland, Oregon
Posts: 3,468
Total Cats: 365
Shakedown laps happened today, car was great. GoPro didn't capture any sound though so I need to figure out if either I specified the wrong input or if the external mic used for the first time (that's been sitting in the toolbox since IDK 2014 when I bought it) didn't actually provide any sound. New camera, new mic, first time using the new GoPro software and config menus which they've tried to make easy to use and point and click for the tide-pod-eating generation and instead of course have made things more uncertain as to "is my camera on these settings and will it keep them every time I power it on."
Thread
Thread Starter
Forum
Replies
Last Post