My awesome daily project 35mpg/150whp highway donut
#86
Elite Member
iTrader: (10)
Join Date: Jun 2006
Location: Athens, Greece
Posts: 5,979
Total Cats: 356
I don't remember if it will fit, however it does have a different (triangular) connector with 3 pins, as it is also the sensor for the gauge cluster (the 94 has a separate sensor for that).
And yes, that will solve the compatibility issue.
And yes, that will solve the compatibility issue.
#87
mkturbo.com
iTrader: (24)
Join Date: May 2006
Location: Charleston SC
Posts: 15,178
Total Cats: 1,681
Are you doing a coolant reroute? I am almost positive that the threads are the same between a 94 coolant sensor and a 01 coolant sensor. Just make sure you use the 94 coolant sensor so you don't have to change the pigtail.
#99
Tour de Franzia
Thread Starter
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
Thanks, bros.
I have not yet checked the mail but I will tonight. The car is back on the road with a temporary header-sheetmetal wrap/hose clamp fix. I should get the swap don't one week next month. I want to get MS2 in the car on the 1994 engine first, on the 1999 IAC, so I will have less things to deal with after swapping. I'm doing this swap alone in my 1-car garage so I'm going to be pretty fussy after putting the engine in the car. I'm going to probably take-off a Thursday and Friday so I have a four-day to do the work.
BTW, I'm talking to Dimitris in email now about how to handle the tach wiring. I think it's a good idea to wire-in the tach output so the harness he's making will be ultimately clean. What wires should I cut from the factory coils to the tach? Do those wires go from the factory computer or from the coils to the tach.
I need to learn to read a wire diagram, any tips other than googling "how to read a wire diagram"?
I have not yet checked the mail but I will tonight. The car is back on the road with a temporary header-sheetmetal wrap/hose clamp fix. I should get the swap don't one week next month. I want to get MS2 in the car on the 1994 engine first, on the 1999 IAC, so I will have less things to deal with after swapping. I'm doing this swap alone in my 1-car garage so I'm going to be pretty fussy after putting the engine in the car. I'm going to probably take-off a Thursday and Friday so I have a four-day to do the work.
BTW, I'm talking to Dimitris in email now about how to handle the tach wiring. I think it's a good idea to wire-in the tach output so the harness he's making will be ultimately clean. What wires should I cut from the factory coils to the tach? Do those wires go from the factory computer or from the coils to the tach.
I need to learn to read a wire diagram, any tips other than googling "how to read a wire diagram"?