sean's cheap thrills, 90 1.6 with subaru td04
#1041
SADFab Destructive Testing Engineer
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
I see that reference Sean. Not appreciated
Rings are sexy. Did you use pipe? Or round stock. I want to try and make some. I need practice on the lathe.
7 hours into the drive to MRLS, brakes are working great.
Rings are sexy. Did you use pipe? Or round stock. I want to try and make some. I need practice on the lathe.
7 hours into the drive to MRLS, brakes are working great.
#1042
SadFab CEO
Thread Starter
iTrader: (3)
Join Date: Sep 2012
Location: your mom's house phoenix, AZ
Posts: 4,560
Total Cats: 1,142
Solid round, which kind of sucks, but I got it cheap, and had it cored out in 10 minutes.
Ever since I replaced the run cap in the lathe, I can actually make roughing cuts again, yay!
Ever since I replaced the run cap in the lathe, I can actually make roughing cuts again, yay!
#1044
SadFab CEO
Thread Starter
iTrader: (3)
Join Date: Sep 2012
Location: your mom's house phoenix, AZ
Posts: 4,560
Total Cats: 1,142
Finally got some tuning time today. I got the dead times for my injectors from TLFperforamnce, and its amazing how much better VEAL works lol, not to mention low pulse width events like idle, etc.
Got the other end of my det cans done.
I havnt plugged it into the amp yet, but holding the hose up to my ear, i can hear... stuff.
I used the pattern making kit that emilio includes with the crossflow radiator for free!
here you can also see temporary det can hose routing, didnt feel like drilling the firewall.
Cut to size, but needs bent
I bent it
It shield all the things
I have a miniscule water leak i cant find. Going to go drive some more, and finish making the brackets for the heat shield. I need to buy some more rubber edging too.
Got the other end of my det cans done.
I havnt plugged it into the amp yet, but holding the hose up to my ear, i can hear... stuff.
I used the pattern making kit that emilio includes with the crossflow radiator for free!
here you can also see temporary det can hose routing, didnt feel like drilling the firewall.
Cut to size, but needs bent
I bent it
It shield all the things
I have a miniscule water leak i cant find. Going to go drive some more, and finish making the brackets for the heat shield. I need to buy some more rubber edging too.
#1047
SadFab CEO
Thread Starter
iTrader: (3)
Join Date: Sep 2012
Location: your mom's house phoenix, AZ
Posts: 4,560
Total Cats: 1,142
well ya beat me to it
https://www.miataturbo.net/build-thr...2/#post1268213
Did the chamnber style because its the first thing that came across google. Whats the other option/s?
https://www.miataturbo.net/build-thr...2/#post1268213
Did the chamnber style because its the first thing that came across google. Whats the other option/s?
#1048
SADFab Destructive Testing Engineer
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
I like this stuff if you don't have a preference already
1 4" Black Trim Lock Vinyl Edge Lok RV camper Door Trailer RV Window | eBay
1 4" Black Trim Lock Vinyl Edge Lok RV camper Door Trailer RV Window | eBay
#1049
I took the amp apart, took the microphone out of it, extended the leads, then potted the mic in a heavy 0 gauge ring terminal attached on the block. JB weld and stuff, for solid connection.
Isn't that how the electric det cans supposed to work?
https://www.miataturbo.net/ecus-tuni...e2/#post843154
Isn't that how the electric det cans supposed to work?
https://www.miataturbo.net/ecus-tuni...e2/#post843154
#1050
SadFab CEO
Thread Starter
iTrader: (3)
Join Date: Sep 2012
Location: your mom's house phoenix, AZ
Posts: 4,560
Total Cats: 1,142
I took the amp apart, took the microphone out of it, extended the leads, then potted the mic in a heavy 0 gauge ring terminal attached on the block. JB weld and stuff, for solid connection.
Isn't that how the electric det cans supposed to work?
https://www.miataturbo.net/ecus-tuni...e2/#post843154
Isn't that how the electric det cans supposed to work?
https://www.miataturbo.net/ecus-tuni...e2/#post843154
#1052
SADFab Destructive Testing Engineer
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
THIS GUY! IT DOES COOL THINGS TOO. Especially with your lack of MS3x.
TinyIOx v1.0 Board
*Disclaimer, I don't use it but have been meaning to.
TinyIOx v1.0 Board
*Disclaimer, I don't use it but have been meaning to.
#1053
SadFab CEO
Thread Starter
iTrader: (3)
Join Date: Sep 2012
Location: your mom's house phoenix, AZ
Posts: 4,560
Total Cats: 1,142
THIS GUY! IT DOES COOL THINGS TOO. Especially with your lack of MS3x.
TinyIOx v1.0 Board
*Disclaimer, I don't use it but have been meaning to.
TinyIOx v1.0 Board
*Disclaimer, I don't use it but have been meaning to.
edit- is there code specifically for wideband?
#1056
SadFab CEO
Thread Starter
iTrader: (3)
Join Date: Sep 2012
Location: your mom's house phoenix, AZ
Posts: 4,560
Total Cats: 1,142
you linked edge stuff for 1/4", this is more better for sheet metal
1 16" Black Edge Trim Lok camper Trailer RV Seals Lock | eBay