I see that reference Sean. Not appreciated

Rings are sexy. Did you use pipe? Or round stock. I want to try and make some. I need practice on the lathe.

7 hours into the drive to MRLS, brakes are working great.

 

Solid round, which kind of sucks, but I got it cheap, and had it cored out in 10 minutes.

Ever since I replaced the run cap in the lathe, I can actually make roughing cuts again, yay!

 

Got the rest of the studs!

One is like the first one, a little large. Of the other 4, 3 are perfect and one is a little tight.

 

Finally got some tuning time today. I got the dead times for my injectors from TLFperforamnce, and its amazing how much better VEAL works lol, not to mention low pulse width events like idle, etc.


Got the other end of my det cans done.






I havnt plugged it into the amp yet, but holding the hose up to my ear, i can hear... stuff.

I used the pattern making kit that emilio includes with the crossflow radiator for free!
here you can also see temporary det can hose routing, didnt feel like drilling the firewall.






Cut to size, but needs bent




I bent it




It shield all the things



I have a miniscule water leak i cant find. Going to go drive some more, and finish making the brackets for the heat shield. I need to buy some more rubber edging too.

 

I am under the assumption that all 1.6 miata leak a tiny bit of coolant at all times.

Were there a reason you went with the tin can style det-cans? What's with the amp, do you mean a set of hollowed out earmuffs?

 

Amp

 

well ya beat me to it
https://www.miataturbo.net/build-thr...2/#post1268213

Did the chamnber style because its the first thing that came across google. Whats the other option/s?

 

I like this stuff if you don't have a preference already

1 4" Black Trim Lock Vinyl Edge Lok RV camper Door Trailer RV Window | eBay

 

I took the amp apart, took the microphone out of it, extended the leads, then potted the mic in a heavy 0 gauge ring terminal attached on the block. JB weld and stuff, for solid connection.

Isn't that how the electric det cans supposed to work?

https://www.miataturbo.net/ecus-tuni...e2/#post843154

 

oh yea, i did see something like that. I dunno, lets just say mine has better harmonics for a more complete knock detection.

 

So im sick of AFR offsets. Whats the wideband CAN module of choice these days? And more importantly, which is the cheapest one that works well?

 

THIS GUY! IT DOES COOL THINGS TOO. Especially with your lack of MS3x.

TinyIOx v1.0 Board

*Disclaimer, I don't use it but have been meaning to.

 

Is there code for it? I like the expansion it would provide, seeing how im just about out of I/O

edit- is there code specifically for wideband?

 

aidan didn't you already put together a component list for it too? send me a pair of everything and ill solder it all up.

 

Nope. It comes soldered. Just buy it. Code is already there for everything. Wideband works with an LC-1 and uses the 3.5mm jack. Not sure about others.

 

for some reason i thought it was just a board.

you linked edge stuff for 1/4", this is more better for sheet metal
1 16" Black Edge Trim Lok camper Trailer RV Seals Lock | eBay

 

I'm going to go buy some of that.

I have the 1/4 inch for my bumper cutout and random edges that get rubbed on.

 

cheaper- 1 16" Black Edge Trim Lock camper Trailer RV Boat Seal Lock Permanent Lok Grip | eBay

 

oh snap!
1 16" Black Edge Trim Lock camper Trailer RV Boat Seal Lock Permanent Lok Grip | eBay

 

You are thinking of the VR conditioner, that is just a board.