Originally Posted by psyber_0ptix (Post 1522613)

Hello all, time for an update.

It's winter again which mean I'm in crisis mode trying to figure out if I have motivation to continue this project. As many folks already know, I struggle from time to time with parting out and starting over from scratch. I've talked to Shibby about it for over a year, and he finally pulled the gun and decided to move on. Buy His Stuff Here. I made the mistake of tabulating a for sale list and was staggered how much I have in this Miata and saddened about the amount required to cage it and buy a Kmiata trans kit to make it as reliable as can be. I just don't think I can cross that hurdle. Even though I already have the Getrag transmission on standby. Then it's axles...then its.....


I've described it recently like being in a bad relationship. You've settled, you're comfortable, don't have the will power to change, but secretly look at other cars/projects and think of what could be. I question if I actually enjoy working on this car, it has no nuance. I love working on my friends' cars and find the quality of work is generally higher than what I commit to working on my own. It comes and goes in waves; the urge to part out because it makes financial sense. But sentimental thoughts reel it back in, and it's a pretty tumultuous cycle. I have to admit, I could use the liquidated assets for other things right now, house stuff, accelerate loan payments, even pick up a shell and start over with a more modest build that would be more huckable around the track. Tax return this year is pretty garbage so that doesn't help....that would have been my ticket for the BMW trans kit. I feel like I've crumbled at the finish line before me. It's just a question of part out now - rip the bandaid off, part out later after enjoying it for one last summer/MATG, or try to sell it whole and take a massive loss but be done cold turkey.

As it sits the car is not assembled. Head is coming back from the shop soon. Lot's of changes to the setup that I may or may not actually get to run depending on how things go. This will be the third iteration of the build and there's still a make-or-break test I need to do. Leakdown past the rings. If it sucks, then I honestly wonder if that'll be the tipping point. If everything is fine, then I might just mindlessly continue reassembly and squeeze one more season and a couple track days in before parting ways. If there is any catastrophic failure, I don't think I'll rebuild. If the stock 6 speed shreds after 18psi tickles the megasquirt, then I don't think I'll rebuild.

New for 2019:
Refreshed head with cams. I suspect leaky valves, so I had it sent off for a checkup. Also sporting the Supermiata reroute. I also happened to stumble on another set of tomei cams and impulsively purchased them which I fully regret. 2019 year of regrets.

Fluidampr - just something to try. No reason really, the Supermiata damper had been fine but again, I've been impulsive because boredom.

Twin scroll manifold
Top mount ramhorn. I'm keeping the EFR6758, but going to try out the 0.8 A/R T4 turbine housing. It's probably a bad idea, but this bad idea has been brewing for nearly two years; I'd even spoken to Abe about it before he committed more time to family. It's just been an ear worm after talking to matrussell122, Geoff at Full-Race, and a couple other folks. Just want to try something different because I'm bored and need stimulation. If it sucks, at least we will have data, and I can always go back to the trusty old single scroll. Ridge Fabrication was able to jig my Artech manifold so it keeps the same downpipe position and compressor housing orientation. It's an easy comparison because downpipe and intercooler are untouched. Very cost effective. Dual port IWG and 4 port EBC. I still envy Aidan's potentiometer controlled boost set points.

Aero?!
I have a splitter, designed by afm that I've been meaning to mount for some time. I also have a 9 Lives Wing because I'm cheap on the aero. Or I could sell it all and part the car out. I don't know. I already picked up a paint matched trunk for $100 so I can cut it up for the uprights.

ABS Knuckles?!
still need to replace all the bearings and hubs. I'd also like the transfer the SADFab upper spherical bushings but will likely have to torch the sleeves out of the current knuckles. I want to pirate the ABS sensors for possible traction control. Or just get rid of it.


If you made it this far, thanks for listening to my complaints. Just in a pretty bad funk.


Your reward
https://cimg7.ibsrv.net/gimg/www.mia...b044f09fe9.jpg



Getting messy
https://cimg8.ibsrv.net/gimg/www.mia...310ab31bc8.jpg





TLDR;
Financial priorities are changing. I'm not sure if this project does it for me anymore. I kinda want to start from scratch. I don't know if I should reassemble once more, enjoy and part out...or just start gutting it while I'm ahead. If I catch some inspiration to try one last time we can look forward to a cammed VVT head with a twin scroll setup for science. I have too much pride to start a go-fund-me for trans kit, but would gladly take stickers and poscats instead.

Originally Posted by matrussell122 (Post 1566971)

He parted out the car. As far as i know im currently the only one with a TS BP motor and its sold to another member but hasnt picked it up yet. However there should be dyno results by end of summer.

Originally Posted by Gn0m4 (Post 1566877)

Hi buddy, interested in those T4TS results !! Did you test it?

Originally Posted by shuiend (Post 1567198)

I have this twinscroll manifold now. One of these days I should be dynoing it with both a 6258 and a 6758 Will be able to compare it to a TSE manifold, MKTurbo manifold, and a Kraken manifold. Maybe another one or two manifolds also.

Originally Posted by Gn0m4 (Post 1567207)

That should be nice. I'm thinking to switch my Kraken for a short runner TS/6258 in my little 1.6 because keep lag as low as possible.

Originally Posted by shuiend (Post 1567214)

I mean a 1.8 swap will be cheaper and give you less lag then going to a TS on a 1.6

Originally Posted by shuiend (Post 1567198)

I have this twinscroll manifold now. One of these days I should be dynoing it with both a 6258 and a 6758 Will be able to compare it to a TSE manifold, MKTurbo manifold, and a Kraken manifold. Maybe another one or two manifolds also.

Originally Posted by 18psi (Post 1567229)

And at some point I'll do something too someday
:giggle: