tyson87's build
#21
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,501
Total Cats: 4,080
all the MS does is activate the stock fan relay. it would be the relay that would burn out if there was too much power drawn from it. but in my experience there shouldn't be any issues with two fans.
#23
Ok, the coolant lines have to be re-routed. Forgive me for saying it, but it looks ugly. On the coolant line near the frame, move the 90 fitting to the distribution block and the straight fitting at the turbo. Route the oil supply line by the engine block and not the firewall. I will also send you a another 90 to use on the other coolant line to run it downward. See the pictures below.
#25
Senior Member
Thread Starter
iTrader: (6)
Join Date: Aug 2008
Location: West Palm Beach, FL
Posts: 1,020
Total Cats: 1
thanks steph,
i will try to run the lines a different way.
so i will have all my parts on the 3rd...
dyno is on the 6th...
itll be close so i hope everything things go together with out any problems...
i will try to run the lines a different way.
so i will have all my parts on the 3rd...
dyno is on the 6th...
itll be close so i hope everything things go together with out any problems...
#33
Senior Member
Thread Starter
iTrader: (6)
Join Date: Aug 2008
Location: West Palm Beach, FL
Posts: 1,020
Total Cats: 1
the kit: 1400$
ms: 500$
lc1: 180$
pipes: ~100$
couplers/clamps: ~150$
intercooler: 110$
3" exhaust: 300$
labor: 3 pizzas and 2 gift cards
misc fittings: 40$
i think that is all u need performance wise
dyno #'s this weekend
ms: 500$
lc1: 180$
pipes: ~100$
couplers/clamps: ~150$
intercooler: 110$
3" exhaust: 300$
labor: 3 pizzas and 2 gift cards
misc fittings: 40$
i think that is all u need performance wise
dyno #'s this weekend
#37