ViperOrMiata builds the Pelican
#153
Elite Member
Thread Starter
iTrader: (24)
Join Date: Aug 2008
Location: Key West
Posts: 6,110
Total Cats: 283
Sav uses COPS on E85 @ 350+whp with no issues. I should be just fine.
#154
Elite Member
Thread Starter
iTrader: (24)
Join Date: Aug 2008
Location: Key West
Posts: 6,110
Total Cats: 283
Alright. The igniter is on it's way to Ryan for some COP action. I will be sending him my intake manifold and my comp. housing because he found me some sweet deals on powder coating in his area. But first I need to get a new pair of snap ring pliers because mine broke trying to get that gorilla ring off the Holset for a second time.
AND I decided to go ahead and swap out throttle bodies on the intake manifold before I send it off to get pretty. Now I need to decide between a Honda, LS, or whatever throttle body that can give me a near stock idle, etc...I'm sure the MS3 will be handy here.
My 6spd showed up from our dear Lord Savingballs the 3rd. The dumb ************* that handle packages down here went out of their way to screw this one up, just like my brake package fiasco from earlier this year. The crate was marked THIS SIDE UP and I come home to find the crate sitting on it's tail end with THIS SIDE UP facing the wall Everything seems to be fine as Sav strapped this thing down tight, but it did leak some of the fancy race oil from the tail end. I will be taking the 5spd out shortly and sending it off to Ryan as trade for the fancy COP setup and for hooking me up with the powder coating shop.
Small leak from sitting the wrong way up.
Nice and pretty.
I also decided to update my clutch/flywheel setup while I have the trans out. I'm leaning hard towards the FM happy meal stg.2 It seems to come with everything I would want/need. I'll be happy to hear some suggestions from the crowd if you guys have any other ideas.
AND I decided to go ahead and swap out throttle bodies on the intake manifold before I send it off to get pretty. Now I need to decide between a Honda, LS, or whatever throttle body that can give me a near stock idle, etc...I'm sure the MS3 will be handy here.
My 6spd showed up from our dear Lord Savingballs the 3rd. The dumb ************* that handle packages down here went out of their way to screw this one up, just like my brake package fiasco from earlier this year. The crate was marked THIS SIDE UP and I come home to find the crate sitting on it's tail end with THIS SIDE UP facing the wall Everything seems to be fine as Sav strapped this thing down tight, but it did leak some of the fancy race oil from the tail end. I will be taking the 5spd out shortly and sending it off to Ryan as trade for the fancy COP setup and for hooking me up with the powder coating shop.
Small leak from sitting the wrong way up.
Nice and pretty.
I also decided to update my clutch/flywheel setup while I have the trans out. I'm leaning hard towards the FM happy meal stg.2 It seems to come with everything I would want/need. I'll be happy to hear some suggestions from the crowd if you guys have any other ideas.
#159
Elite Member
Thread Starter
iTrader: (24)
Join Date: Aug 2008
Location: Key West
Posts: 6,110
Total Cats: 283
Nope, same thread. Just been busy with work (season started) and waiting for ARtech to have some free time.
Update: Parts are being sent to ARtech soon for some handy dandy fab work. He will be making me a downpipe, wastegate dump pipe (recirc'd) and converting my 2-bolt wastegate flange to v-band. I think I've suffered enough pain and torture with having to deal with my old setup's wastegate placement.
I'll be driving the car on 6-7lb's when the parts get back here and on the car. I'm going to dial it in nicely to see how this combination of parts works together and from there I will throw in some 1000's and crank the pressure until I kill this motor. The current motor in my car was installed in 1996 and has 140K+ boosted miles. It's still running fine after years and years of abuse. I'm not sure how long it will last at over 300tq. Either way, I'm set on building a new shorty from a 92-93 car so I can eventually run a balancer like all the cool kids.
Update: Parts are being sent to ARtech soon for some handy dandy fab work. He will be making me a downpipe, wastegate dump pipe (recirc'd) and converting my 2-bolt wastegate flange to v-band. I think I've suffered enough pain and torture with having to deal with my old setup's wastegate placement.
I'll be driving the car on 6-7lb's when the parts get back here and on the car. I'm going to dial it in nicely to see how this combination of parts works together and from there I will throw in some 1000's and crank the pressure until I kill this motor. The current motor in my car was installed in 1996 and has 140K+ boosted miles. It's still running fine after years and years of abuse. I'm not sure how long it will last at over 300tq. Either way, I'm set on building a new shorty from a 92-93 car so I can eventually run a balancer like all the cool kids.
#160
Elite Member
Thread Starter
iTrader: (24)
Join Date: Aug 2008
Location: Key West
Posts: 6,110
Total Cats: 283
The last thing I needed came in today. Now I have to ship it away, haha.
Here is something clean and "baller" to look at so you guys can stop making fun of my turbo....
I have to give HUGE props to Extreme PSI. After two weeks of hunting down deals and telling the big companies to go **** themselves for wanting 40 dollars to ship one of these, I got this MVS "kit" with every spring for 260 bucks from Extreme PSI.
Here is something clean and "baller" to look at so you guys can stop making fun of my turbo....
I have to give HUGE props to Extreme PSI. After two weeks of hunting down deals and telling the big companies to go **** themselves for wanting 40 dollars to ship one of these, I got this MVS "kit" with every spring for 260 bucks from Extreme PSI.