Sup guys started building my turbo miata this saturday and well ran into some problems just my noob as trying to do this on my own any ways this what i have

-Fm 1.6 maniflod and downpipe and a garret t25 of an s13.

Megasquirt pnp2
Mishimoto intercooler
I have 3inch pipeing will be returning those for 2.5 inch the people i bought it off from sent me the wrong ones but are accepting my return and will be getting 2.5 inch yatatata...

So my problem being the t25 turbo i have gets in the way of the fm manifold i wanted to clock the turbo but it seem that waste gate will move out of place from where it bolts is there a way to make like a bracket so it wont hit ill post some pics right now thanks i welcome anh help you miata peeps can offer thanks.

 

i have a friend that did this exact setup. you will just need to make a new attachment for the bracket. looks like you did a really solid setup. good job. one thing i will say is that it is preferred to use 3" exhaust on the miata.

 

Have any reference pic to go off by? And thanks

 

I was talking to my friend but all he did was rotate the heat shield on the wastegate actuator and his fit fine. Also, i am now remembering it was a 2554 not a T25. sorry for the confusion!!

 

We made a bracket for mine as well, i dont have an up close but its in my build thread


found it

 

I bought my kit off of Curly on here and this was his solution. Very simple and works just fine.

 

Dam thats sick well im gonna try makeing a braket myself but will definetly look into the curly just incase it doesnt work out